f?p=104:6:3611042580166308::::FSP_DISB,FSP_LANG_ID:NO,25 Technical Bodies List en-gb 23 May 2013 23:13:01 +0100 Copyright CENELEC 2013. All Rights Reserved. 30 http://www.cenelec.eu/img/clc_logo.jpg http://www.cenelec.eu/dyn/www/f?p=104:6:::::FSP_DISB,FSP_LANG_ID:NO,25 109 109 CENELEC image http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10105,25 2012-03-01 To define the tasks and responsibilities of the New Approach Consultants http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11505,25 2013-01-30 Standardization, in link with mandate M/490, of measuring relays and protection equipment used in the various fields of electrical engineering covered by CENELEC, taking into account combinations of devices to form schemes for power system protection including the control, monitoring and process interface equipment used with those systems. Moreover, works on standards for electrical connection to ensure energy availability and security, in presence of a high ratio of Distributed Energy Resources (DER) and allowing connected generators to participate to new ways of operating grid (e.g. associated in VPPs or micro grids)". Excluded are the following: All devices covered by standards prepared by other CENELEC technical committees, for example instrument transformers. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11506,25 2013-01-30 To be confirmed: To follow the standardization activities of ENTSO-E (European Network of Transmission System Operators for Electricity) and further promote the MoU between CENELEC and this organisation, as well as the several positions expressed thereon. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11507,25 2013-01-30 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11508,25 2013-01-30 To produce a CENELEC Guide addressed to the CENELEC Technical Bodies, on the basis of the existing IEC Guide 116 ‘Guidelines for safety related risk assessment and risk reduction for low voltage equipment http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1164,25 2005-05-27 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1165,25 2005-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:64,25 1982-01-01 Standardization in the field of power transformers, tap-changers and reactors for use in power generation, transmission and distribution. Generally these transformers have power ratings above 1 kVA single phase and 5 kVA polyphase with a higher voltage winding of 1 000 V or more, however the scope includes lower voltage transformers and regulators used in power delivery applications. Excluded: - Instrument transformers - Testing transformers - Traction transformers mounted on rolling stock - Welding transformers - Transformers for applications covered by TC 96. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:60,25 1982-01-01 To prepare harmonized standards giving specifications and application rules for rotating machines based on IEC publication 34 "Rotating electrical machines" and its parts and also standards relating to the mechanical vibration of these machines. New work is concentrated only on subjects which have not already been proposed to IEC TC 2 or to one of its Working Groups. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:813,25 1996-01-01 To develop harmonised and other European standards and deliverables relating to cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing and transmitting all kinds of data signals for interactive services using all applicable transmission media. These signals are typically transmitted in networks by frequency-multiplexing techniques. This includes for instance • regional and local broadband cable networks, • extended satellite and terrestrial television distribution systems, • individual satellite and terrestrial television receiving systems, and all kinds of equipment, systems and installations used in such cable networks, distribution and receiving systems. The extent of this standardization work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input of the customer premises equipment. The standardization work will consider coexistence with users of the RF spectrum in wired and wireless transmission systems. The standardization of any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1076,25 2002-09-26 To develop process management standards on systems, components and equipment used in the field of avionics. Avionics includes electronics used in commercial, civil and military aerospace applications. The work of TC 107X will take into account the special European needs e.g. in the field of ecological and environmental concerns such as disposal or recycling of electronic equipment, including the previous work items of BTTF 91-3 and BTTF 101-3. Furthermore, CLC/TC 107X is to ensure that the specific European requirements will adequately be reflected in IEC/TC 107. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10083,25 2006-04-04 To deal with Parts 2 and 3 of the Internal Regulations http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1059,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1060,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1061,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1062,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1063,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1064,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1065,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1068,25 2002-01-01 To formulate immunity and emission requirements based on a common approach for CATV, powerline and telecommunications networks. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1072,25 2002-07-02 To work out possible common modifications to EN 60309-1 and EN 60309-2 on plugs, socket-outlets and couplers for industrial purposes, on the basis of the commments put forward by the Italian National Committee. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1077,25 2002-09-26 To prepare the necessary standards framework and coordinate the development, in cooperation with other TC/SCs, of CENELEC standards needed to facilitate the functioning of electricity supply systems in open markets. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1078,25 2002-09-26 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1050,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1156,25 2005-01-14 To deal with environmental aspects for electrical and electronic products and systems. To promote activities in CENELEC relevant to reducing detrimental impacts of electrotechnical activities/products/systems on the natural environment (In this context "reducing" means a process of continual environment improvement aimed towards an optimum balance with social, economic, safety and performance requirements). To enhance CENELEC's environmental links with the European legal framework, particularly in the context of standardization aspects of EU environmental regulations and directives. To improve energy and resource efficiency of electrotechnical products and systems as important aspects in order to reduce impacts on the environment (for example climate changes and resource depletion) To prepare the necessary standards framework and in co-operation with other CENELEC Technical Bodies co-ordinate the development of, or when necessary produce, the needed standardization deliverables. Product TCs remain autonomous in dealing with environmental aspects relevant to the products included in their scope. To assist product committees in the elaboration of environmental requirements of product standards in order to foster common technical approaches and solutions for similar problems and thus promote consistency in CENELEC standards. To cooperate with recognized standardization bodies and other relevant organizations for matters of common environmental interest. To communicate with and to give advice to CENELEC BT and Technical Committees on questions related to work on environmental issues. EMC and EMF aspects are excluded, but relevant developments will be noted. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1151,25 1996-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1113,25 2004-05-04 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1111,25 2004-03-16 To prepare harmonized standards for high-voltage switchgear and controlgear including their assemblies for rated voltages above AC 1 kV or above DC 1,5 kV. Note : In general, relevant IEC standards will be transposed into EN via the Dresden Agreement. To prepare and revise harmonized standards for enclosures of gas-filled high-voltage switchgear having a design pressure higher than atmospheric pressure. To observe and support European activities related to standardization in the field of high voltage switchgear and controlgear in order to ensure the availability of EN suitable to cover the essential requirements of European Directives. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1092,25 2003-07-01 To prepare a draft standard, as described in BT(IT/NOT)83 (Fluids for electrotechnical applications - National standard for the inventory control, handling, decontamination and/or disposal of electrical equipment and insulating fluids containing PCBs). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1093,25 2003-07-01 To develop two European standards on the subject. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1096,25 2003-07-01 To reconsider the structure and technical contents of EN 50086-2-4:1994 "Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground"; prEN 14280 "Plastic piping systems for buried cable ducting - Unplasticized poly(venyl chloride) (PVC-U) - Specifications for pipes, fittings and the system"; prEN 14821 "Plastic piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system" and prEN 14282 "Plastic piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system", in order to achieve (a) common CEN/CENELEC draft standard(s). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1100,25 2003-07-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1107,25 2003-12-02 To prepare European standards (ENs), Technical specifications (TSs) and Technical reports (TRs). These documents will cover surge protective devices (SPDs) for protection against surges due to lightning and/or other transient overvoltages and their selection and application. These devices are to be used in power, telecommunication and/or signalling networks with voltages up to 1 000 V a.c. or 1 500 V d.c. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1051,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1052,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1053,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1055,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1057,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1058,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:922,25 1998-07-09 To prepare and maintain specifications relating to electrical relays in accordance with the requirements of document CECC 00 111, for use within the CECC system for the quality assessment of electronic components. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1028,25 1900-03-07 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1029,25 1982-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1030,25 1982-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1031,25 1990-03-07 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1032,25 1987-09-23 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1033,25 1977-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1034,25 1991-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1035,25 1982-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1036,25 1973-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1037,25 1982-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1038,25 1990-06-13 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1039,25 1990-06-13 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1040,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1042,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1043,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1044,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1045,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1046,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1047,25 1999-06-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1048,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1006,25 2001-12-04 To prepare standards for design, installation, operation and maintenance of aeronautical ground lighting of aerodromes. The activity covers requirements which apply to the whole system from the power source up to and including the luminaries used in aeronautical ground lighting. The activity will not cover - electrical installations already standardised by TC 64; - luminaries not used as aeronautical ground lights standardised by TC 34; - special cables for the constant current series circuit standardised by TC 20. Note : Operational requirements for aeronautical ground lights are specified in Annex 14 to the Convention on International Civil Aviation (Volume I, Aerodrome Design and Operations). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1010,25 2001-09-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1011,25 2001-09-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:989,25 2001-03-06 To prepare European Standards for systems of and components for photovoltaic conversion of solar energy into electrical energy and for all elements in the entire photovoltaic energy system. The standards will deal with EMC, Machine, CPD and LVD directives. The CLC/TC 82 will especially develop standards in areas where there are special European concerns. The CLC/TC 82 will cooperate closely with IEC TC 82 and the National Committees. The aim will be to support the accelerated market introduction by harmonization of standards. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:990,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:995,25 1999-03-09 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1002,25 2001-09-25 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1003,25 2001-09-25 TC 106X deals with various aspects of the exposure of people to electromagnetic fields from 0 Hz to 300 GHz. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1004,25 2000-10-05 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:987,25 1999-12-07 Joint CEN/CENELEC steering coordination and programming group entrusted: a) with the task to manage the different project teams to develop guides for procurement and submit them through the secretariat to the common CEN/CENELEC procedures. b) and with the task to make a survey of supporting standards needed, identifying the existing and missing standards as well as the responsible CEN or CENELEC technical committee for their drafting or redrafting. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:970,25 2000-07-04 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:983,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:984,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:986,25 2001-03-06 To prepare draft standards on wind turbine systems on the basis of a detailed work programme for the execution of the mandated tasks to be performed for the standardization in this field. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:963,25 1999-09-30 To prepare a CENELEC response to EC study mandates for the production of guidance documents in the field of safety and usability of electrical products with reference to people with special needs (e.g. children, elderly and people with disabilities). To define general guidelines to ensure that Design for All and Assistive Technologies requirements are taken into account when performing standardization work in CENELEC. To comment to the list of recommendations if appropriate. To identify where CENELEC standardization is needed and define a work programme in response to the mandate. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:964,25 1999-12-07 To follow up IEC activities in the light of European needs for the field of winding wires. To follow up environmental aspects taking into account the European Directives. Preparation of new European Standards, if necessary, to cover particular European aspects. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:942,25 1998-10-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:943,25 1960-01-10 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:944,25 1999-03-09 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:947,25 1999-03-09 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:914,25 1998-07-09 To prepare and maintain European Standards in the field of fixed and variable resistors and networks for use in electronic equipment. These standards are for use within a suitable system for quality assessment of electronic components, and aim to support the trading activities of European component users and manufacturers. Close liaison is maintained with IEC/TC 40, which includes parallel voting on similar documents where possible and enable IEC documents to be adopted in Europe. Co-operation is also maintained with other relevant IEC Technical Committees, such as TC 91 and TC 104, where such co-operation will promote the convergence of the two systems. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:859,25 1996-07-02 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:863,25 1996-10-01 To prepare standards dealing with power electronics. The standards will deal with equipment, their component parts (especially electronic devices) and their extension to the system aspect. Standards for power converters interfacing general power systems to dedicated systems, for example railways, shall be dealt with jointly by TC 22X and relevant product committees. The following are excluded: - converters for rolling stock; - converters and charging equipment for electrical vehicles; - emitters for telecommunication; - dimmers for lighting. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:912,25 1998-07-09 To prepare European standards, which are required to facilitate the trading activities of European component users and manufacturers, in the following areas: a) capacitors, fixed and variable, for use in electronic equipment; b) capacitors, resistors and inductors, and combinations of these, used for electro-magnetic interference suppression, and complete electro-magnetic interference suppression filter units; c) networks and passive integrated circuits containing capacitors, or combinations of resistors, capacitors and inductors. Close liaison is maintained with IEC TC 40 which includes parallel voting enabling IEC documents to be adopted in Europe. Liaison is also maintained whith relevant IEC Technical Committees, such as 47, 91, 104, and, in the area of safety, 61, 62 and 108, where such liaison will promote the convergence of the two systems. Note : This committee does not deal with - lighting capacitors, which are the responsibility of CLC/TC 34Z; - power capacitors and power filters, which are covered by TC 33 in IEC, and ratified under the parallel vote procedure in Europe. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:910,25 1998-03-10 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:911,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:882,25 1997-07-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:884,25 1997-07-01 To prepare and maintain specifications for optical fibres and optical fibre cables, excluding image transmission types http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:885,25 1997-07-01 To prepare and maintain European Standards and specifications for fibre optic interconnect, passive and connectorised components, including the tubes, closures and interconnect components used for blown fibre http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:868,25 1996-10-31 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:870,25 1996-12-09 To prepare European Standards or, where not possible, guides for lightning protection for structures and buildings as well as for persons, services and contents. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:873,25 1994-10-31 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:877,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:864,25 1996-10-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:814,25 1996-01-01 To prepare EMC standards and guidelines with particular emphasis on the application of the EMC Directive and other EC Directives that contain EMC references and to coordinate all EMC activities in CENELEC. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:816,25 1996-01-01 To prepare European standardization publications for products and systems used to the management of all types of cables, information and communication lines, electrical power distribution conductors and associated accessories. Management includes support and/or containment and/or retention and/or protection against external influences. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:838,25 1996-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:825,25 1996-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:821,25 1996-01-01 To prepare harmonized standards for communication systems using electricity supply lines or the wiring of buildings as a transmission medium and using frequencies above 3 kHz. This includes the allocation of frequency bands for signal transmissions on the mains http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:818,25 1996-01-01 - To address standardization in the field of electrotechnical aspects of telecommunication equipment and associated infrastructures and liaise with other standardization bodies as appropriate. - To prepare harmonized standards (EN, TS or TR) covering all aspects of generic and application-specific telecommunications cabling (e.g. ISDN, LAN and others) within all types of premises. - These documents also cover the requirements and recommendations for building infrastructures related to the effective installation and operation of associated telecommunication equipment by reference to the existing or forthcoming standards provided by the relevant committees or using technical inputs from them. - To provide contributions to ETSI standards (EN and/or other deliverables) in areas related to those detailed above. - To serve as a mediator in those cases where in accordance with the CENELEC-ETSI-Agreement ETSI indicates to CENELEC the need of standardization activities (EN/TS/TR or contributions to ETSI deliverables) of electrotechnical aspects related to its work. - Identification of the appropriate TC within CENELEC, thereby providing proper assignment of the technical work to the responsible group of experts. - Where an appropriate TC within CENELEC cannot be identified, TC 215 may decide to establish a Working Group to resolve a specific task. - To review international standardization results of ISO/IEC JTC 1 as far as telecommunication equipment with respect to Customer Premises Cabling and Energy Efficient Data Centres are concerned. This includes coordination of harmonization and assignment to the responsible organisation in close cooperation with CEN bearing in mind JTC 1 being a joint ISO/IEC-Committee. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11245,25 2012-09-18 Subsea systems within the scope of TC 18X, including all seabed installed and downhole power and control, interacting with topside and shore based facilities’ power and control systems. Addressing subsea electrical loads such as: motors and drives for pumps and compressors, energy distribution and storage, direct electric heating for pipe flow assurance, subsea controls - with elements instruments, sensors, controllers, modem communication all linked to the topside unit’s power system and control gear. The applicable choice of transmission medium for power and signals, e.g. galvanic/fiber/radio/acoustic/pulsed, will be site specific and according to functional requirements; design will be aligned to existing ISO and IEC/CENELEC technical standards and engineering practices. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11246,25 2012-05-08 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:819,25 1996-01-01 To standardize general and specific requirements for the construction, safety, performance and testing for electrical apparatus for sensing the presence of gas or vapour and for providing an indication, alarm and/or other output function, the purpose of which is to give a warning of explosion hazard, fire hazard or health hazard. The standardization work of TC 216 concerns domestic gas detectors and those industrial and commercial gas detectors that are not included in the scope of CLC/SC 31-9. To provide information and guidance, as appropriate, on the selection, installation and operation of such apparatus. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:790,25 1995-11-30 To prepare harmonized standards for high voltage power installations (exceeding 1 kV a.c. or 1,5 kV d.c.) located indoors or outdoors, including earthing. The standards will specify the design requirements of the installations, and the selection and erection of electrical equipment in order to ensure the safety of persons and the proper operation of the installations. The standards will not be applicable to factory built and type tested equipment, but will be relevant to the installation of this equipment. The standards will not be applicable to overhead and underground lines between separate installations. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:769,25 1995-09-22 To prepare European Standards (using whenever possible IEC Standards) in the field of AC and/or DC current and/or voltage instrument transformers, including their subparts like (but not limited to) sensing devices, signal treatment, data conversion and analog or digital interfacing. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:756,25 1995-04-11 Revision of EN 45501:1992 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:809,25 1996-01-01 To standardize the specific requirements for the protection against high voltage electric shocks in the construction, test and use of electrostatic painting and finishing equipment for spraying non-flammable material. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:810,25 1996-01-01 To prepare standards for all aspects of home and building electronic systems in relation to the Information Society. In more detail: To prepare standards to ensure integration of a wide spectrum of control applications and the control and management aspects of other applications in and around homes and buildings, including the gateways to different transmission media and public networks taking into account all matters of EMC and electrical and functional safety. TC 205 will not prepare device standards but the necessary performance requirements and necessary hardware and software interfaces. The standards should specify conformity tests. TC 205 will perform the work in close co-operation with relevant CENELEC TCs and those in CEN and ETSI. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:659,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:738,25 1990-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:717,25 1990-01-01 Preparation of standards on criteria for bodies involved in testing calibration, certification, inspection, accreditation, their operation and assessment, and other related standards. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:725,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:731,25 1994-07-15 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:732,25 1994-07-15 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:734,25 1994-10-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:678,25 1993-08-19 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:683,25 1993-09-14 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:687,25 1993-09-21 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:643,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:644,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:645,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:646,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:647,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:648,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:649,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:658,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:578,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:582,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:586,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:588,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:589,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:590,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:591,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:592,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:593,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:594,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:595,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:596,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:597,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:599,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:603,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:604,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:605,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:606,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:607,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:609,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:610,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:614,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:615,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:540,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:545,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:546,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:547,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:548,25 1993-06-25 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:552,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:553,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:554,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:555,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:556,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:557,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:558,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:559,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:560,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:561,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:562,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:564,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:565,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:566,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:568,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:569,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:570,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:571,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:572,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:573,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:574,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:575,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:576,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:577,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:520,25 1993-06-01 To prepare standards for the physical media and for the protocols for communication systems to be used for the remote reading of all kinds of meters (electricity, water, gas, heat, etc). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:521,25 1993-06-01 To standardize all active implantable medical devices and their accessories. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:524,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:527,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:528,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:529,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:530,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:531,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:532,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:533,25 1960-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:505,25 1992-12-11 To contribute, support and coordinate the preparation of international standards for systems and elements used for industrial process measurement, control and automation at CENELEC level. To coordinate standardisation activities which affect integration of components and functions into such systems including safety and security aspects. This CENELEC work of standardisation is to be carried out for equipment and systems and closely coordinated with IEC TC65 and its subcommittees with the objective of avoiding any duplication of work while honouring standing agreements between CENELEC and IEC http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:664,25 2011-04-12 To prepare European standards related to electrical systems for road vehicles, totally or partly propelled from self-contained power sources http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:619,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:621,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:622,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:623,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:625,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:626,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:628,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:629,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:630,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:631,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:633,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:634,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:635,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:636,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:637,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:638,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:639,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:642,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10706,25 2011-04-12 To establish a CENELEC/BT Action Plan in view of the implementation of the CENELEC strategy 2010-2013 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:180,25 1989-12-06 To prepare a standard, as described in BT(DE/NOT)110 (Operation of power installations - Part 1: General Requirements). Remarks 67 BT decided that BTTF 62-3 should prepare a standard dealing with the broad (general) principles of operation of power installations and asked BTTF 62-3 to take into account the essential requirements of the directive on safety at the work place. 74 BT agreed to change the title of BTTF 62-3 into "Operation of electrical installations". http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:204,25 1991-09-25 To prepare a standard, as described in BT(DE/NOT)141 (Road traffic signal systems). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:104,25 1976-01-01 To prepare harmonized standards for the construction, installation, testing, use and safety of electric arc welding equipment. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:105,25 1976-01-01 To prepare harmonized standards for the construction, installation, testing and use of electrical resistance welding equipment with the aim of achieving improved electrical safety, with particular reference to the work of IEC/TC 26, TC 44, TC 64 and ISO/TC 44. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:99,25 1967-01-01 To prepare a harmonized standard for factory-built and other assemblies of low-voltage switchgear and controlgear based on IEC 60439. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:100,25 1990-03-07 To execute the following standardization activities for secondary cells and batteries: - to implement IEC/TC 21/SC 21A documents into CENELEC standards; - to prepare Product Standards, general requirements and methods of testing included; - to prepare Safety Standards and associated Codes of Practice; - to consider Environmental Requirements (EC Rules) for the products. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:102,25 1987-09-23 To prepare harmonized standards for electrical circuit breakers for overcurrent protection, devices protecting against electric shock and all related accessories. These devices are used for household and similar purposes. The word "similar" includes locations such as offices, commercial and industrial premises, hospitals, public buildings etc. This equipment is intended for fixed installations or for use in or with appliances or other equipment. This equipment may include electronic components. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:159,25 2013-01-30 To proceed with the revision or amendment of EN 50066:1992 ‘Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles’ (PR=3389). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:134,25 1981-01-01 To standardize specific requirements for the construction and testing of electrical apparatus type of protection "n", intended for use in potentially explosive atmospheres. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:136,25 1976-05-31 To standardize specific requirements for the construction and testing of electrical apparatus, type of protection "p", including that with an internal source of flammable gas and vapour intended for use in potentially explosive atmospheres. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:137,25 1982-01-01 To standardize specific requirements for the construction, testing and use of electrostatic paint and powder equipment for spraying flammable materials. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:138,25 1982-03-05 (See also TC 216) General and specific requirements for construction, safety, performance and testing of apparatus for sensing the presence of combustible gases or vapours and for measuring their concentration in industrial and commercial potentially explosive atmospheres. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:139,25 1992-01-01 To establish and maintain European Standards regarding coaxial cables for use in telecommunication, data transmission, radio frequency, video-communication and signalling equipment. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:140,25 1991-01-01 To produce European Cable Specifications for multicore and symmetrical pair/quad cables used in digital and analogue communication systems such as ISDN, LAN and data communication systems. According to the installation considerations, five categories of cables are to be considered: 1. equipment cables, 2. work area cables, 3. horizontal floor wiring cables, 4. riser cables, 5. campus cables. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:130,25 2010-10-28 To standardize rules for the installation of electrical apparatus in a potentially explosive atmosphere. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:131,25 1981-01-01 To standardize specific requirements for the construction and testing of electrical apparatus with flameproof enclosure, type of protection "d", intended for use in potentially explosive atmospheres. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:132,25 1982-01-01 To standardize specific requirements for construction and testing of intrinsically safe electrical apparatus, type of protection "i", intended for use in potentially explosive atmospheres. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:133,25 1982-01-01 To standardize specific requirements for the construction and testing of the following electrical apparatus intended for use in potentially explosive atmospheres : - Increased safety electrical apparatus, type of protection "e", - Caplight for mines susceptible to firedamp. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:120,25 1990-12-13 To deal with the standardization of railway communication, signalling and processing systems, taking into account the relevant safety requirements http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:121,25 1990-12-13 Electrical, electronic and electromechanical material on board rolling stock, including associated software. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:122,25 1990-12-13 To deal with the standardization of - AC and DC supply lines, both overhead and third rail type, - ancillary circuits, - machinery and equipment of special feature for traction in fixed plants, - installations and safety requirements in fixed plants. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:125,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:111,25 1988-01-01 To prepare harmonized standards primarily relating to electrical and electronic equipment and systems of machines (including a group of machines working together in a co-ordinated manner excluding higher-level systems aspects) not portable by hand while working but which may include mobile equipment. The equipment covered commences at the point of connection of the electrical supply to the machine. To prepare harmonized standards for safety related equipment, using electrotechnology, intended to be used to satisfy the essential safety requirements of the Council of the European Communities directives covering safety of machinery that is outside the scope of any other Technical Committee. To co-ordinate with CEN, all matters concerning the safety of machinery. To advise the Technical Board (BT) on all matters concerning machinery. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:112,25 1990-03-07 To establish standards related to wires, symmetric cables, coaxial cables and waveguides with metallic conductors for use in telecommunication, data transmission, radio frequency, video communication and signalling equipment to satisfy the advances in developing technologies. Particular requirements for materials, if necessary, will be evaluated in liaison with other technical committees. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:114,25 1982-01-01 To prepare European standards on methods of measurement of characteristics which are of importance to determine the performance of household and similar electrical appliances and are of interest to the consumer. This may include associated aspects related to the use of the appliances and aspects such as classification, accessibility and usability of appliances, ergonomic characteristics and conditions for the information provided at the point of sale http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:108,25 1977-01-01 To prepare harmonized standards based on concluded international standards in the lighting field, but excluding lamps. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:109,25 1979-01-01 To prepare harmonized standards for bushings for use in electrical apparatus, transformers and installations. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:62,25 1992-03-26 To prepare harmonized standard for overhead electrical lines. The standard(s) will specify the general requirements that should be met by the design and construction of an overhead line to ensure that the line is suitable for its purpose with regard to safety of persons, maintenance, operation and environmental consideration. CENELEC, CEN, IEC publications and other relevant documents have to be considered. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:63,25 1990-03-07 Standardization in the field for metering equipment and systems (using whenever possible IEC standards), including smart metering systems, for electrical energy measurement, tariff- and load control, customer information and payment, for use in power stations, along the network and at energy end users, as well as to prepare international standards for meter test equipment and methods. Excluded: Standardization for the interface of metering equipment for interconnection lines and industrial consumers and producers requiring energy management type interfaces to the control system, covered by IEC/TC 57 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:65,25 1982-01-01 To prepare harmonized standards in the field of insulated conductors, cables and flexible cords and their accessories, for both low and high voltage with the exception of telecommunications wires and cables. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:66,25 1982-01-01 To standardize the general requirements for the construction and testing of electrical apparatus for potentially explosive atmospheres and the specific requirements for the construction and testing of electrical apparatus, type of protection "o" (oil immersed) and type of protection "q" (powder filled) and types with protection for use in the presence of combustible dusts, and to co-ordinate the work of the sub-committees dealing with the standardization of specific requirements for other individual types of protection. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:73,25 1971-10-01 To prepare harmonized standards for detection, alarm and monitoring systems for protection of persons and property, and for elements used in these systems. The scope includes in particular intruder and hold-up alarm systems, access control systems, periphery protection systems, combined alarm - fire alarm systems, social alarm systems, CCTV-systems, other monitoring and surveillance systems related to security applications, as well as associated and dedicated transmission and communication systems. The standards shall specify conformity tests. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:74,25 1990-03-07 Standardization of electrical and electronic systems, equipment and associated software for use in all railway applications, whether on vehicles or fixed installations, including urban transport. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:70,25 1987-12-04 To prepare harmonized standards for rules related to inherent safety, to the operating characteristics where such are associated with applicational safety and to the testing of automatic electrical control devices used in appliances and other apparatus, electrical and non-electrical for household and similar purposes such as those for central heating, air conditioning etc. including the following: 1. Automatic electrical control devices mechanically, electro-mechanically, electrically or electronically operated responsive to or controlling such parameters as temperature, pressure, passage of time, humidity, light, electrostatic effect, flow or liquid level. 2. Automatic electrical control devices serving the starting of small motors that are used principally in appliances and apparatus for household and similar purposes. Such control devices may be built into or be separate from the motor. 3. Non-automatic control devices when such are associated with automatic control devices. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:71,25 1990-06-13 To prepare harmonized standards in the field of equipment incorporating lasers (and light emitting diodes) or intended only for use with lasers. Also covered are those factors introduced by the use of lasers which are needed to characterize the equipment and/or which are essential to safe use. The scope includes the preparation of standards defining limits for human exposure to optical radiation (100 nm to 1 mm) from artificial sources. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:72,25 1990-06-13 To prepare CENELEC standards for work equipment, devices and tools, including personal protective equipment used for work on or near live electrical systems or installations. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:68,25 1982-01-01 To establish harmonized standards and other publications concerning electrical equipment, electrical systems and software used in healthcare and their effects on patients, operators, other persons and the environment. NOTE: This scope includes items that are also within the scopes of other committees and will be addressed through cooperation. Attention will focus on safety and performance (e.g. radiation protection, data security, data integrity, data privacy and environmental aspects) and will contribute to regulatory frameworks. Healthcare includes medical practice as well as emergency medical services, homecare, and support of persons with disabilities in their daily lives (i.e. Ambient Assisted Living). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:69,25 1982-01-01 To prepare harmonized standards (HDs and ENs) - concerning protection against electric shock arising from equipment, from installations and from systems without limit of voltage; - for the design, erection and verification of all kinds of low-voltage electrical installations, except those installations covered by the following CENELEC Technical Committees : TC 9X, TC 44X; - in co-ordination with TC 99X, concerning requirements additional to those of TC 99X for the design, erection and verification of electrical installations of buildings above 1 kV up to 35 kV. The objects of the standards shall be - to lay down requirements for the safety aspects of the design, erection and verification of electrical installations and co-ordination of electrical equipment; - to lay down safety requirements for protection against electric shock; - to lay down safety requirements for protection against other hazards arising from the use of electricity and - to facilitate European exchanges that may be hampered by differences in national regulations. The standards will not cover individual items of electrical equipment other than their selection and erection in an installation. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:67,25 1973-01-01 To harmonize recognized international standards dealing with safety requirements for electrical appliances for household and similar purposes and, where necessary, to prepare harmonized standards for such appliances. Health and environmental requirements are to be taken into account. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:97,25 1982-01-01 To prepare harmonized standards for low-voltage apparatus, based on concluded international standards (normally prepared by IEC SC 17B). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10263,25 2006-08-15 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10271,25 2006-12-06 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10370,25 2006-12-06 To revise EN 50191:1999 "Erection and operation of electrical test equipment" http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10372,25 2007-01-16 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10481,25 2008-10-21 To prepare a draft residual standard based on EN 60849:1998 that is complementary to EN 54-16 "Fire detection and fire alarm systems -- Part 16: Voice alarm control and indicating equipment" http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10483,25 2008-10-21 The CEN/CENELEC BT Working Group “STAndardization, Innovation and Research” (WG STAIR) shall carry out the following three tasks: - To develop an integrated approach of research and innovation with standardization (short term task – to be closed end 2009) - To raise awareness and ensure communication of benefit (short term task – to be closed end 2010) - To review, adapt and monitor the infrastructure and operational environment (medium term task – to be reviewed before end 2012) http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10415,25 2007-09-11 To prepare the endorsement of IEC/SC45A standards as EN standards and, if necessary, common modifications. This proceeds after having confirmation that the IEC candidate standards were approved at the IEC final stage of development by the majority of the European national committees entitled to vote and that no European national committee raised significant concerns for the application of these standards in the European countries. The common modifications prepared have to be limited as far as possible and to be consistent with the WENRA (Western European Nuclear Regulators’ Association) aims for an international harmonised approach to reactor safety. All proposals for common modifications have to be justified. If a common modification proposal is controversial then the fall back position is to keep the text of the IEC/SC45A standard unchanged, given that the IEC/SC45A standards implement the IAEA (International Atomic Energy Agency) safety principles. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10406,25 2007-04-11 To revise prEN 62004:2006 "Thermal resistant aluminium alloy wire for overhead line conductor" http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10409,25 2007-06-27 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10412,25 2006-09-12 To elaborate EN standards in the energy management and related services field: - Energy Management Systems: definition and requirements - Energy Service Companies (ESCO): definition, requirements and qualification procedures - Energy Managers and Experts: roles, professional requirements and qualification Procedures http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10413,25 2006-09-12 Standards for common methods of calculation of energy consumption, energy efficiencies and energy savings and for a common measurement and verification of protocol and methodology for energy use indicators http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10416,25 2007-09-11 Provisional: Endorsement of IEC/SC 45B documents at European level http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:101,25 1980-01-01 a) To prepare standards for general purpose switches including electronic switches, time-delay switches, remote control switches and isolating switches, Fireman's switches, for a.c. only, with rated voltage not exceeding 440 V, and with a maximum rated current not exceeding 125 A, intended for household and similar purposes, either indoors or outdoors. b) To prepare standards for switches and related accessories for use in Home and Building Electronic Systems (HBES), with a working voltage not exceeding 250 V a.c. and a rated current up to and including 16 A, intended for household and similar purposes, either indoors or outdoors and to associate electronic extension units. c) To prepare standards for general purpose plugs and fixed and portable socket-outlets, with a rated voltage not exceeding 440 V d.c. and a rated current not exceeding 10A, intended to be used in restricted access areas where only skilled or instructed people have access. d) To prepare standards for general purpose boxes and enclosures for household devices, boxes and enclosures with provision for suspension means, connecting boxes and enclosures, floor boxes and enclosures, enclosures for housing protective devices and similar power consuming devices with a rated voltage not exceeding 440 V, intended for household and similar purposes, either indoors or outdoors. e) To prepare standards for ancillary products which relate to/incorporate products covered by a), b), c), e.g. luminaire couplers, adaptors/cable reels, indicator light units, etc. f) To prepare standards for socket-outlet (socket outlets and plugs) - connector (connectors and inlets) configurations for conductive charging of electric vehicles, including plug-in hybrid road vehicles. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10456,25 2008-02-01 to handle the VILAMOURA notification BT/ES0023/NOT under Spanish convenorship with participation of AT, BE, DE, FR and IT NCs http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10460,25 2008-03-01 To develop a guidance document on selection, use, care and maintenance of PPE against electrostatic risks http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10462,25 2007-12-05 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10468,25 2008-04-17 To revise EN 50156 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10750,25 2011-09-15 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10700,25 2011-04-06 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10508,25 2009-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10722,25 2011-07-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10510,25 2009-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10516,25 2009-02-01 To prepare European safety standards for hand-held and transportable motor-operated electric tools and gardening appliances http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:1027,25 2002-03-05 Product standards are to be elaborated for gas fired appliances with combined heating and power to be harmonised with the essential requirements of the Gas Appliance Directive (90/396/EC). To avoid overlapping with other technical bodies, the focus of the standards to be elaborated is materials, design, construction of the appliances to ensure safe operation and performance http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10482,25 2008-10-21 This Guide provides guidance to writers of European standards on the abilities and needs of micro, small and medium-sized enterprises (SMEs). This Guide is relevant to all involved in standardisation i.e. standard writers in Working Groups or Technical Committees as well as members of national mirror committees. Not all principles presented in this guide do necessarily have to apply to all standards. Therefore, TCs and WGs are the best place to evaluate if and how to address specific needs of SMEs in their standards. The aim of this Guide is to avoid provisions in standards that may lead to exclusions of SMEs from the market or distortion of fair competition. This Guide contains: a) considerations for the development of standards that are properly balanced between product / service function and SME needs b) techniques for identifying and assessing provisions in standards that may have special impacts on SMEs c) ways to reduce negative impacts on SMEs resulting from some provisions in standards d) writing guidelines e) checklists f) information on how to make a micro company impact assessment. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10596,25 2009-05-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10511,25 2008-08-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:611,25 1900-01-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10635,25 2009-03-13 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10644,25 2009-11-17 To reflect on the questions posed in document BT N 8283 on "Balanced representation in technical bodies", to consider how the rules and provisions as presented in this document are applied and to identify best practices. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10649,25 2010-10-01 To prepare international standards for power systems control equipment and systems including EMS (Energy Management Systems), SCADA (Supervisory Control And Data Acquisition), distribution automation, teleprotection, and associated information exchange for real-time and non-real-time information, used in the planning, operation and maintenance of power systems. Power systems management comprises control within control centres, substations and individual pieces of primary equipment including telecontrol and interfaces to equipment, systems and databases, which may be outside the scope of TC 57. The special conditions in a high voltage environment have to be taken into consideration. NOTE 1: Standards prepared by other technical committees of the IEC and organizations such as ITU and ISO shall be used where applicable. NOTE 2: Although the work of TC 57 is chiefly concerned with standards for electric power systems, these standards may also be useful for application by the relevant bodies to other geographical widespread processes. NOTE3: Whereas standards related to measuring and protection relays and to the control and monitoring equipment used with these systems are treated by TC 95, TC 57 deals with the interface to the control systems and the transmission aspects for teleprotection systems. Whereas standards related to equipment for electrical measurement and load control are treated by TC 13, TC 57 deals with the interface of equipment for interconnection lines and industrial consumers and producers requiring energy management type interfaces to the control system http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:860,25 2010-10-01 To review the EN 45544 series "Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours" http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10669,25 2010-10-01 To develop a methodology to evaluate the market relevance of standardization projects, inviting this new BTWG • to develop a strategy for consultation mechanisms with key stakeholders (e.g. Orgalime, Business Europe, Eurochambers, etc.) to contribute to the development of the methodology; • to liaise with ISO and IEC in order, if possible, to follow a common approach; • to consider how to integrate the methodology into existing rules and policies and to propose a monitoring system to review its effectiveness. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10670,25 2010-10-01 The Project Committee should develop a basic standard for services for fire safety and security systems. The basic standard specifies the requirements for quality of services supplied by companies and the competencies of their involved staff charged with the planning and design, engineering, installation and hand over, maintenance and repair of fire safety and/or security systems*. * Examples of fire safety and/or security systems, are fire detection-, fire extinguishing -, voice alarm-, intruder alarm-, hold up-, access control-, social alarm-, smoke and heat exhaust ventilation-, CCTV systems, control equipment for escape and evacuation route, and combination of such systems as mentioned before. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10384,25 2006-12-06 The objective of the joint Technical Committee is to contribute to, and where necessary draft, suitable standards for "Quality management and corresponding general aspects for medical devices" that are applicable internationally and relevant to the essential requirements of EU Directives. The joint Technical Committee closely cooperates with ISO/TC 210 "Quality management and corresponding general aspects for medical devices" in the development of standards and revisions. The objective of the joint Technical Committee is to contribute to a further global harmonization of standards in close co-operation with ISO/TC 210. In principle the standards are drafted by ISO/TC 210 under the Vienna agreement with ISO-lead, including the joint work programme with IEC/SC 62. The joint Technical Committee will liaise with other Technical Committees - to achieve a coherent set of horizontal and product standards; - to minimize the necessity for additional European requirements; - to advise on aspects concerning quality management and risk management to ensure an optimal use of EN ISO 13485 and EN ISO 14971. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10620,25 2010-03-31 Standardization on guarantees of origin for trading and/or disclosure/labelling of electricity and CHP and on energy certificates http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11248,25 2012-09-18 Standardization in the field of information exchange for demand response and in connecting demand side equipment and/or systems into the smart grid http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11249,25 2012-09-18 To develop European standards for equipment and systems for measuring, testing, monitoring, generating, and analyzing simple and complex electrical and electromagnetic quantities, as well as their calibrators. These standards apply to measuring equipment for industrial, commercial and building electrical installations (networks) always with the aim to preserve the quality of power supply in order to avoid malfunction and overheating of the connected devices, in particular due to an alteration of the mains voltage. The development of harmonized standards is also intended to meet the challenges of controlling energy consumption and is likely to be used as a support to the Technical Bodies involved in the Smart Grid and Smart Metering activities, or to be used as a support for EC Directives. Equipment in the scope of CLC/TC 85X include power meters and power quality instruments, calibrated measurement devices, signal generators, monitoring equipment, recorders and electrical measuring transducers, and devices for testing, measuring or monitoring of protective measures as given by European installation standards, together with their accessories. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11250,25 2012-09-18 To cover product requirements for low voltage cold cathode and LED installations, in liaison with CLC/TC 34Z and CLC/TC 64 (mode 4 of cooperation). http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11585,25 2013-04-14 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10825,25 2011-10-01 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10752,25 2011-10-05 To prepare standards for electrical installations and equipment of ships and of mobile and fixed offshore units used in the offshore petroleum industry, including interconnected subsea equipment, incorporating good practice and aligning as far as possible existing regulations and IEC/CENELEC Publications. The standards will chiefly concern: a) factors promoting the safety of ships and of mobile and fixed offshore units, including interconnected subsea equipment; b) factors promoting safety of life; c) factors promoting the protection of the environment. The standards will form a code of practical interpretation and amplification of the requirements of the International Convention on Safety of Life at Sea, a guide for future regulations may be prepared by Administrations, and a statement of practice for use by builders and appropriate organizations. The standards will also foster interchangeability of parts and ease the selection and procurement of equipment, including media for transport of energy, signals and data, by indicating, as appropriate, IEC/CENELEC-standards of ratings, types, dimensions, materials, quality, test methods, etc., whether or not these are influenced by regulations, and will thus facilitate interchanges between purchaser and supplier http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10824,25 2012-02-01 To monitor the adoption in CENELEC of the technical work from IEC/TC 100 standards in the field of audio, video and multimedia systems and equipment. These standards include specification of the performance, methods of measurement for consumer and professional equipment and their system application as well as interoperability with other systems and equipment. To ensure that any deviation from the IEC standards, such as common modifications, special national conditions and A-deviations, is only in response to a clear and justifiable European need, such as European and national legislative requirements. To strive towards keeping international and European requirements aligned as far as possible (applying the different mechanisms of the Dresden Agreement). To coordinate the work with other standardisation organisations on European level, taking responsibility for applicable mandates from the European Commission and developing its own standards only when necessary. Standards and other deliverables prepared by Technical Area 5 (TA5) of IEC/TC 100 do not fall under the scope of CLC/TC 100X but are covered on European level by CLC/TC 209 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:563,25 1900-01-01 Standardization in the field of industrial equipment and installations intended for electroheating, electromagnetic processing of materials and electroheat based treatment technologies Note: The scope of interest covers industrial installations with the use of the following equipment: - equipment for direct and indirect resistance heating; equipment for electric resistance trace heating; - equipment for induction heating; - equipment using the effect of electromagnetic forces on materials; - equipment for arc heating, including submerged arc heating; - equipment for electroslag remelting; - equipment for plasma heating; - equipment for microwave heating; - equipment for dielectric heating; - equipment for electron beam heating; - equipment for laser heating; - equipment for infrared radiation heating. The list presents typical examples of equipment and its applications and is not exhaustive. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11305,25 2012-11-07 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11385,25 2012-12-05 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:10755,25 2011-10-16 This TC covers all standardization activities in CEN and CENELEC related to space, including dual use aspects, systems of systems, as well as upstream and downstream applications, inasmuch as these topics are not covered by any other existing technical body in CEN or CENELEC or by the European Cooperation for Space Standardization (ECSS) or ETSI, therefore it is important and necessary that it coordinates its work with relevant technical bodies in ETSI. It develops European Standards that are needed to support the implementation of EU-level space projects. http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11045,25 2012-05-31 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11105,25 2012-05-31 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:11365,25 2012-11-28 http://www.cenelec.eu/dyn/www/f?p=104:7:::::FSP_ORG_ID,FSP_LANG_ID:85,25 2002-07-02 • To deal with the adoption in CENELEC of technical work of IEC/TC 108 and to coordinate the work with other technical bodies at European level e.g. ETSI. To make own standards where a particular need arises. NOTE The field of application of IEC/TC 108 is as follows: Standardization in the field of safety for audio/video and similar technology, information technology and communication technology equipment. • To ensure that any deviation from the IEC standards, such as common modifications, special national conditions and A-deviations, is only in response to a clear and justifiable European need, such as European and national legislative needs. • To resolve application questions e.g. raised by CCA Operational Staff Meetings relative to standards within the responsibility of CLC/TC 108X. • To keep IEC/TC 108 informed of European requirements so that they may be considered for inclusion in IEC standards within the responsibility of IEC/TC 108. list