Definitive Text - EN 61076-2-103:2004
Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')

Definitive Text - EN 60512-5-1:2002
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

Definitive Text - EN 60512-23-7:2005
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Definitive Text - EN 60512-23-7:2005
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Definitive Text - EN 60512-23-7:2005
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Definitive Text - EN 60603-2:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Definitive Text - EN 60603-3:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,1 in) centres and staggered terminations at that same spacing

Definitive Text - EN 60512-11-11:2002
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

Definitive Text - EN 61076-4-111:2002
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

Definitive Text - EN 60352-2:1994
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 175300:1996
Sectional Specification: Rectangular connectors for frequencies below 3 MHz

Definitive Text - EN 61076-1:1995/A1:1996
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval

Definitive Text - EN 61076-4-108:2002
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1

Definitive Text - EN 61076-7-100:2006
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

Definitive Text - EN 61076-7-100:2006
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

Definitive Text - EN 61076-7-100:2006
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

Definitive Text - EN 60512-25-6:2004
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

Definitive Text - EN 61076-7-001:2004
Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

Definitive Text - EN 60512-25-7:2005
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)

Definitive Text - EN 60512-25-7:2005
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)

Definitive Text - EN 60512-25-7:2005
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)

Definitive Text - EN 61076-3-104:2006
Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-104:2006
Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-104:2006
Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz

Definitive Text - EN 60512-9-3:2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 61076-2-101:2003/A1:2006
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 61076-2-101:2003/A1:2006
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 61076-2-101:2003/A1:2006
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 60512-13-1:2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-1:2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-1:2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-2:2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-13-2:2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-13-2:2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-12-4:2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-4:2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-4:2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-3:2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 60512-12-3:2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 60512-12-3:2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 61076-2-101:2003
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 61076-2-101:2003
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 61076-2-101:2003
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications

Definitive Text - EN 60512-11-7:2003
Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

Definitive Text - EN 60512-10-4:2003
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

Definitive Text - EN 60068-2-42:2003
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

Definitive Text - EN 60512-2-6:2002
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

Definitive Text - EN 60512-11-13:2002
Connectors for electronic equipment - Tests and measurement - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

Definitive Text - EN 60603-5:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

Definitive Text - EN 61076-1:1995/A2:2001
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval

Definitive Text - EN 61076-4-001:1996
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification

Definitive Text - EN 60512-11-14:2003
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

Definitive Text - EN 60512-11-14:2003
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

Definitive Text - EN 60352-5:2001/A1:2003
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60603-6:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

Definitive Text - EN 60352-2:1994/A1:1997
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-3-101:1997
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line

Definitive Text - EN 60352-6:1997
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-1:2006
Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Definitive Text - EN 61076-1:2006
Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Definitive Text - EN 61076-1:2006
Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Definitive Text - EN 61076-3-106:2006
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Definitive Text - EN 61076-3-106:2006
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Definitive Text - EN 61076-3-106:2006
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Definitive Text - EN 60512-11-2:2002
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

Definitive Text - EN 60512-2-3:2002
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

Definitive Text - CECC 75 301-802:1994
Detail Specification: Rectangular connectors for frequencies below 3MHz, trapezoidal shaped shells and round contacts, diameter 1 mm with crimp, solder and press-in terminations for printed boards

Definitive Text - EN 60603-2:1998/A1:2005
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Definitive Text - EN 60603-2:1998/A1:2005
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Definitive Text - EN 60603-2:1998/A1:2005
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Definitive Text - EN 61076-1:1995
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval

Definitive Text - EN 60512-2-5:2003
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

Definitive Text - CECC 75 101-801:1993
Two-part connectors for printed boards for basic grid of 2,54 mm with common mounting features

Definitive Text - EN 60352-1:1997
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-19-3:1997
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

Definitive Text - EN 60512-1-4:1997
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

Definitive Text - EN 60512-6-5:1999
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

Definitive Text - EN 60512-16-20:1996
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

Definitive Text - EN 61076-4:1996
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors

Definitive Text - CECC 75 201-804:1996
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling

Definitive Text - CECC 75 101-810:1994
Two-part modular connectors for printed boards and back planes - Basic grid 2 mm with terminations on a multiple grid of 0,5 mm

Definitive Text - EN 60352-5:1995
Solderless connections - Part 5: Solderless press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-4-100:1998
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 100: Detail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards and backplanes

Definitive Text - EN 60512-1:1994
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General

Definitive Text - EN 60512-1-3:1997
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

Definitive Text - CECC 75 301-803:1996
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable

Definitive Text - EN 60130-17:1999
Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

Definitive Text - EN 60603-14:1999
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

Definitive Text - EN 60512-10-4:1996
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 10: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Section 4: Test 10d: Electrical overload (connectors)

Definitive Text - EN 60512-23-3:2001
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Definitive Text - EN 60130-9:1995/A2:1997
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 60512-11-1:1999
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence

Definitive Text - EN 60512-11-8:1999
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

Definitive Text - EN 60603-13:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

Definitive Text - EN 61076-4-102:1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917

Definitive Text - EN 60512-12-6:1996
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

Definitive Text - EN 60603-4:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

Definitive Text - EN 60603-8:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm

Definitive Text - EN 60603-9:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)

Definitive Text - EN 61076-4-105:1998
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry

Definitive Text - EN 60603-12:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

Definitive Text - EN 60603-7:1997
Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality

Definitive Text - EN 60512-11-7:1996
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 7: Test 11g: Flowing mixed gas corrosion test

Definitive Text - EN 60512-13-1:1997
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 13: Mechanical operating tests - Section 1: Test 13a: Engaging and separating forces

Definitive Text - EN 60512-11-14:1997
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 14: Test 11p - Flowing single gas corrosion test

Definitive Text - CECC 75 101-809:1996
Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 60512-15-8:1995
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

Definitive Text - EN 60603-1:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

Definitive Text - EN 60512-14-7:1998
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

Definitive Text - EN 61076-3:2000
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification

Definitive Text - EN 60352-5:2001
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-20-2:2000
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

Definitive Text - EN 60352-2:1994/A2:2002
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-4-104:1999
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm

Definitive Text - EN 60603-7-1:2002
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality

Definitive Text - EN 61076-4-103:1999
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm

Definitive Text - EN 60352-4:1994/A1:2000
Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Definitive Text - EN 60130-9:2000
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 175101-809:2004
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 175101-809:2004
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 60512-1:2001
Connectors for electronic equipment - Tests and measurements - Part 1: General

Definitive Text - EN 61076-3-103:2004
Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

Definitive Text - EN 61076-4-114:2003
Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm

Definitive Text - EN 61076-4-101:2001
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

Definitive Text - EN 60512-1-100:2001
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-4-1:2003
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

Definitive Text - EN 60512-2-2:2003
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

Definitive Text - EN 60512-11-4:2002
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

Definitive Text - EN 60512-11-9:2002
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

Definitive Text - EN 60512-11-10:2002
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

Definitive Text - EN 60512-11-5:2002
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

Definitive Text - EN 60512-11-12:2002
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

Definitive Text - EN 60512-11-6:2002
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

Definitive Text - EN 60603-7-7:2002
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)

Definitive Text - EN 60352-7:2002
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-7:2002
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-6-3:2002
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

Definitive Text - EN 60512-12-7:2001
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

Definitive Text - EN 60512-23-4:2001
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

Definitive Text - EN 61076-3-103:2004
Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

Definitive Text - EN 61076-3-103:2004
Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

Definitive Text - EN 60512-25-2:2002
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b: Attenuation (insertion loss)

Definitive Text - EN 60512-5-2:2002
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

Definitive Text - EN 60512-6-1:2002
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

Definitive Text - EN 60512-6-4:2002
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

Definitive Text - EN 60512-6-2:2002
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

Definitive Text - EN 60512-11-3:2002
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

Definitive Text - EN 60512-1-1:2002
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

Definitive Text - EN 60512-1-2:2002
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

Definitive Text - EN 60512-2-1:2002
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Definitive Text - EN 61984:2001
Connectors - Safety requirements and tests

Definitive Text - EN 61984:2001
Connectors - Safety requirements and tests

Definitive Text - EN 61984:2001
Connectors - Safety requirements and tests

Definitive Text - EN 61076-3-001:2000
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification

Definitive Text - EN 60512-3-1:2002
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

Definitive Text - EN 60512-4-2:2002
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

Definitive Text - EN 60512-4-3:2002
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

Definitive Text - EN 61076-2-102:2002
Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply

Definitive Text - EN 60352-7:2002
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-3-100:2000
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row

Definitive Text - EN 60068-2-43:2003
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

Definitive Text - EN 61076-4-115:2003
Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

Definitive Text - EN 61076-4-107:2001
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

Definitive Text - EN 61076-3-104:2003
Connectors for electronic equipment - Part 3-104: Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum

Definitive Text - EN 60512-25-5:2004
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

Definitive Text - EN 61076-7:2000
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification

Definitive Text - EN 175101-802:1999
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows

Definitive Text - EN 175101-809:1999
Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 61076-4-100:2001
Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes

Definitive Text - EN 60512-25-1:2001
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

Definitive Text - EN 60512-25-4:2001
Connectors for electronic equipment - Tests and measurements - Part 25-4: Teste25d - Propagation delay

Definitive Text - EN 175201-804:1999
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling

Definitive Text - EN 60512-25-3:2001
Connectors for electronic equipment - Tests and measurement - Part 25-3: Test 25c - Rise time degradation

Definitive Text - EN 60512-16-7:2008
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

Definitive Text - EN 60512-16-7:2008
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

Definitive Text - EN 60512-16-7:2008
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

Definitive Text - EN 60512-16-8:2008
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Definitive Text - EN 60512-16-8:2008
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Definitive Text - EN 60512-16-8:2008
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Definitive Text - EN 60512-16-9:2008
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Definitive Text - EN 60512-16-9:2008
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Definitive Text - EN 60512-16-9:2008
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Definitive Text - EN 60512-16-14:2008
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

Definitive Text - EN 60512-16-14:2008
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

Definitive Text - EN 60512-16-14:2008
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

Definitive Text - EN 60603-10:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type

Definitive Text - EN 60512-16-4:2008
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

Definitive Text - EN 60512-16-4:2008
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

Definitive Text - EN 60512-16-4:2008
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

Definitive Text - EN 61076-4-101:1998
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 101: Detail specification for two-part connector modules having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

Definitive Text - EN 60130-9:1995
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 175200:1996
Sectional Specification: Circular connectors

Definitive Text - EN 61076-3-110:2008
Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-110:2008
Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 60512-16-3:2008
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Definitive Text - EN 60512-16-3:2008
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Definitive Text - EN 60512-16-3:2008
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Definitive Text - EN 61076-3-001:2008
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification

Definitive Text - EN 61076-3-001:2008
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification

Definitive Text - EN 61076-3-001:2008
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification

Definitive Text - EN 175301-801:1999
Detail Specification: High density rectangular connectors, round removable crimp contacts

Definitive Text - EN 60512-13-5:2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60512-15-6:2008
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

Definitive Text - EN 60512-15-6:2008
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

Definitive Text - EN 60512-15-6:2008
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

Definitive Text - EN 60512-13-5:2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60512-13-5:2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60352-5:2008
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-5:2008
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-5:2008
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-15-5:2008
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

Definitive Text - EN 60512-15-5:2008
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

Definitive Text - EN 60512-15-5:2008
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

Definitive Text - EN 60352-2:2006
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-2:2006
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-2:2006
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-16-16:2008
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

Definitive Text - EN 60512-16-16:2008
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

Definitive Text - EN 60512-16-16:2008
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

Definitive Text - EN 60512-16-17:2008
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

Definitive Text - EN 60512-16-17:2008
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

Definitive Text - EN 60512-16-17:2008
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

Definitive Text - EN 60512-16-1:2008
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

Definitive Text - EN 60512-16-1:2008
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

Definitive Text - EN 60512-16-1:2008
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

Definitive Text - EN 60512-16-5:2008
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

Definitive Text - EN 60512-16-5:2008
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

Definitive Text - EN 60512-16-5:2008
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

Definitive Text - CECC 75 201:1990
Interim example Detail Specification/Blank Detail Specification: Circular connectors for frequencies below 3 MHz

Definitive Text - CECC 75 301:1990
Interim example Detail Specification/Blank Detail Specification: Rectangular connectors for frequencies below 3 MHz

Definitive Text - HD 476.1 S1:1986
Solderless connections - Part 1: Solderless wrapped connections - General requirements, test methods and practical guidance

Definitive Text - CECC 75 301-801:1994
Detail Specification: High density rectangular connectors, round removable crimp contacts

Definitive Text - HD 476.2 S1:1992
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance

Definitive Text - CECC 75 101-803:1994
Detail Specification: Two-part connectors for printed boards having a basic grid of 2,54 mm with common square male contacts of 0,63 mm x 0,63 mm

Definitive Text - CECC 75 101-808:1993
Two-part connector modules with a basic grid of 2 mm, for printed boards and backplanes

Definitive Text - CECC 75 101-804:1994
Two-part connectors for printed boards for basic grid of 2,54 mm with free connectors for non-accessible insulation displacement termination (with assessed quality)

Definitive Text - CECC 75 101-807:1994
Modular two-part connectors for printed boards and backplanes, grid of 2,5 mm - According to IEC 60917

Definitive Text - CECC 75 101-802:1996
Detail Specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows

Definitive Text - EN 60352-4:1994
Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-3:1994
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance

Definitive Text - EN 61076-3-117:2009
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling

Definitive Text - EN 61076-3-117:2009
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling

Definitive Text - EN 61076-3-117:2009
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling

Definitive Text - EN 60512-9-1:2010
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

Definitive Text - EN 60512-9-1:2010
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

Definitive Text - EN 60512-9-1:2010
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

Definitive Text - EN 60603-7-51:2010
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60603-7-51:2010
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60603-7-51:2010
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60512-12-2:2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60512-12-2:2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60512-12-2:2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60603-7:2009
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 60603-7:2009
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 60603-7:2009
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 61076-3-114:2009
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

Definitive Text - EN 61076-3-114:2009
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

Definitive Text - EN 61076-3-114:2009
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

Definitive Text - EN 61076-3:2008
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification

Definitive Text - EN 61076-3:2008
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification

Definitive Text - EN 61076-3:2008
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification

Definitive Text - EN 61076-3-116:2008
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

Definitive Text - EN 61076-3-116:2008
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

Definitive Text - EN 61076-3-116:2008
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

Definitive Text - EN 60512-25-9:2008
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

Definitive Text - EN 60512-25-9:2008
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

Definitive Text - EN 60512-25-9:2008
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

Definitive Text - EN 61076-2-101:2008
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 61076-2-101:2008
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 61076-2-101:2008
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 61076-2-104:2008
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking

Definitive Text - EN 61076-2-104:2008
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking

Definitive Text - EN 61076-2-104:2008
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking

Definitive Text - EN 61076-2-101:2012
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 61076-2-101:2012
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 61076-2-101:2012
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Definitive Text - EN 60512-16-2:2008
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

Definitive Text - EN 60512-16-2:2008
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

Definitive Text - EN 60512-16-2:2008
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

Definitive Text - EN 60512-16-6:2008
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

Definitive Text - EN 60512-16-6:2008
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

Definitive Text - EN 60512-16-6:2008
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

Definitive Text - EN 60512-16-11:2008
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

Definitive Text - EN 60512-16-11:2008
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

Definitive Text - EN 60512-16-11:2008
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

Definitive Text - EN 60512-16-13:2008
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

Definitive Text - EN 60512-16-13:2008
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

Definitive Text - EN 60512-16-13:2008
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

Definitive Text - EN 60603-7-41:2010
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60603-7-41:2010
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60603-7-41:2010
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Definitive Text - EN 60512-22-1:2010
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

Definitive Text - EN 60512-22-1:2010
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

Definitive Text - EN 60512-22-1:2010
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

Definitive Text - EN 60512-21-1:2010
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance

Definitive Text - EN 60512-21-1:2010
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance

Definitive Text - EN 60512-21-1:2010
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance

Definitive Text - EN 60512-20-1:2010
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

Definitive Text - EN 60512-20-1:2010
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

Definitive Text - EN 60512-20-1:2010
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

Definitive Text - EN 60512-20-3:2010
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

Definitive Text - EN 60512-20-3:2010
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

Definitive Text - EN 60512-20-3:2010
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

Definitive Text - EN 60603-7-2:2010
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-2:2010
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-2:2010
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-2:2009
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-2:2009
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-2:2009
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2010
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2010
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2010
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2009
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2009
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60603-7-3:2009
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Definitive Text - EN 60512-7-1:2010
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

Definitive Text - EN 60512-7-1:2010
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

Definitive Text - EN 60512-7-1:2010
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

Definitive Text - EN 60512-9-5:2010
Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Definitive Text - EN 60512-9-5:2010
Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Definitive Text - EN 60512-9-5:2010
Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Definitive Text - EN 60512-19-1:2010
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

Definitive Text - EN 60512-19-1:2010
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

Definitive Text - EN 60512-19-1:2010
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

Definitive Text - EN 175301-803:1999
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable

Definitive Text - EN 61076-2-107:2010
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

Definitive Text - EN 61076-2-107:2010
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

Definitive Text - EN 61076-2-107:2010
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

Definitive Text - EN 60512-99-001:2012
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

Definitive Text - EN 60512-99-001:2012
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

Definitive Text - EN 60512-99-001:2012
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

Definitive Text - EN 175101-809:2004/corrigendum Jun. 2005
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 175101-809:2004/corrigendum Jun. 2005
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality

Definitive Text - EN 60603-7-5:2009
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-5:2009
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-5:2009
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 61076-3-115:2010
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

Definitive Text - EN 61076-3-115:2010
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

Definitive Text - EN 61076-3-115:2010
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

Definitive Text - EN 60512-23-2:2010
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

Definitive Text - EN 60512-23-2:2010
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

Definitive Text - EN 60512-23-2:2010
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

Definitive Text - EN 60512-8-1:2010
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

Definitive Text - EN 60512-8-1:2010
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

Definitive Text - EN 60512-8-1:2010
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

Definitive Text - EN 60512-26-100:2008
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 60512-26-100:2008
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 60512-26-100:2008
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 61076-3-118:2010
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling

Definitive Text - EN 61076-3-118:2010
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling

Definitive Text - EN 61076-3-118:2010
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling

Definitive Text - EN 60603-7-7:2006
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Definitive Text - EN 60603-7-7:2010
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Definitive Text - EN 60603-7-7:2010
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Definitive Text - EN 60603-7-7:2010
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Definitive Text - EN 60603-7-7:2006
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Definitive Text - EN 60603-7-4:2010
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-4:2010
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-4:2010
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 61076-2-105:2008
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

Definitive Text - EN 61076-2-105:2008
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

Definitive Text - EN 61076-2-105:2008
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

Definitive Text - EN 60512-17-4:2010
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

Definitive Text - EN 60512-17-4:2010
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

Definitive Text - EN 60512-17-4:2010
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

Definitive Text - EN 60512-17-3:2010
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

Definitive Text - EN 60512-17-3:2010
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

Definitive Text - EN 60512-17-3:2010
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

Definitive Text - EN 60512-17-1:2010
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

Definitive Text - EN 60512-17-1:2010
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

Definitive Text - EN 60512-17-1:2010
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

Definitive Text - EN 61076-4-116:2012
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

Definitive Text - EN 61076-4-116:2012
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

Definitive Text - EN 61076-4-116:2012
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

Definitive Text - EN 60603-7-4:2005
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-4:2005
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-4:2005
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-5:2010
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-5:2010
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 60603-7-5:2010
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Definitive Text - EN 61076-4-110:2002
Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function

Definitive Text - EN 60130-9:2011
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 60130-9:2011
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 60130-9:2011
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Definitive Text - EN 60352-8:2011
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-8:2011
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-8:2011
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-13-1:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-1:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-1:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Definitive Text - EN 60512-13-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-13-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-13-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Definitive Text - EN 60512-13-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60512-13-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60512-13-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Definitive Text - EN 60512-9-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-12-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60512-12-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60512-12-2:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Definitive Text - EN 60512-12-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 60512-12-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 60512-12-3:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Definitive Text - EN 60512-12-4:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-4:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-4:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Definitive Text - EN 60512-12-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 60512-12-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 60512-12-5:2006/corrigendum Dec. 2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 175301-801:2006
Detail Specification: High density rectangular connectors, round removable crimp contacts

Definitive Text - EN 175301-803:2006
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable

Definitive Text - EN 175301-803:2006
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable

Definitive Text - EN 175301-803:2006
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable

Definitive Text - EN 175301-801:2006
Detail Specification: High density rectangular connectors, round removable crimp contacts

Definitive Text - EN 61076-2-001:2001
Connectors for electronic equipment - Part 2-001: Circular connectors - Blank detail specification

Definitive Text - EN 61076-2-106:2011
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

Definitive Text - EN 61076-2-106:2011
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

Definitive Text - EN 61076-2-106:2011
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

Definitive Text - EN 61076-2:1999
Connectors for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification

Definitive Text - EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Definitive Text - EN 60512-9-4:2011
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

Definitive Text - EN 60512-9-4:2011
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

Definitive Text - EN 60603-7-71:2010
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 60603-7-71:2010
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 60603-7-71:2010
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 60512-7-2:2012
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

Definitive Text - EN 60512-7-2:2012
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

Definitive Text - EN 60512-7-2:2012
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

Definitive Text - EN 60512-9-2:2012
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

Definitive Text - EN 60512-27-100:2012
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

Definitive Text - EN 60512-27-100:2012
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

Definitive Text - EN 60512-27-100:2012
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

Definitive Text - EN 60512-9-2:2012
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

Definitive Text - EN 60512-9-2:2012
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

Definitive Text - EN 60512-15-1:2008
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

Definitive Text - EN 60512-15-1:2008
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

Definitive Text - EN 60512-15-1:2008
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

Definitive Text - EN 60512-15-2:2008
Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

Definitive Text - EN 60512-15-2:2008
Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

Definitive Text - EN 60512-15-2:2008
Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

Definitive Text - EN 60512-15-3:2008
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

Definitive Text - EN 60512-15-3:2008
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

Definitive Text - EN 60512-15-3:2008
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

Definitive Text - EN 60512-15-4:2008
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

Definitive Text - EN 60512-15-4:2008
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

Definitive Text - EN 60512-15-4:2008
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

Definitive Text - EN 60512-15-7:2008
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

Definitive Text - EN 60512-15-7:2008
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

Definitive Text - EN 60512-15-7:2008
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

Definitive Text - EN 60512-16-18:2008
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

Definitive Text - EN 60512-16-18:2008
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

Definitive Text - EN 60512-16-18:2008
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

Definitive Text - EN 60603-7:2009/A1:2011
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 60603-7:2009/A1:2011
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 60603-7:2009/A1:2011
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Definitive Text - EN 61076-2:2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

Definitive Text - EN 61076-2:2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

Definitive Text - EN 61076-2:2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

Definitive Text - EN 61076-2-001:2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

Definitive Text - EN 61076-2-001:2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

Definitive Text - EN 61076-2-001:2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

Definitive Text - EN 60512-12-5:2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 60512-12-5:2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 60512-12-5:2006
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Definitive Text - EN 60512-14-2:2006
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

Definitive Text - EN 60512-14-2:2006
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

Definitive Text - EN 60512-14-2:2006
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

Definitive Text - EN 60512-14-6:2006
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

Definitive Text - EN 60512-14-6:2006
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

Definitive Text - EN 60512-14-6:2006
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

Definitive Text - EN 60512-14-5:2006
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

Definitive Text - EN 60512-14-5:2006
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

Definitive Text - EN 60512-14-5:2006
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

Definitive Text - EN 60512-14-4:2006
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

Definitive Text - EN 60512-14-4:2006
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

Definitive Text - EN 60512-14-4:2006
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

Definitive Text - EN 62197-1:2006
Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

Definitive Text - EN 62197-1:2006
Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

Definitive Text - EN 62197-1:2006
Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

Definitive Text - EN 60512-12-1:2006
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

Definitive Text - EN 60512-12-1:2006
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

Definitive Text - EN 60512-12-1:2006
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

Definitive Text - EN 60512-8-2:2011
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

Definitive Text - EN 60512-8-2:2011
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

Definitive Text - EN 60512-8-2:2011
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

Definitive Text - EN 60512-8-3:2011
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

Definitive Text - EN 60512-8-3:2011
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

Definitive Text - EN 60512-8-3:2011
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

Definitive Text - EN 60512-9-3:2011
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2011
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-9-3:2011
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load

Definitive Text - EN 60512-17-2:2011
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

Definitive Text - EN 60512-17-2:2011
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

Definitive Text - EN 60512-17-2:2011
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

Definitive Text - EN 61076-3-112:2006
Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment

Definitive Text - EN 61076-3-112:2006
Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment

Definitive Text - EN 61076-3-112:2006
Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment

Definitive Text - EN 61984:2009
Connectors - Safety requirements and tests

Definitive Text - EN 61984:2009
Connectors - Safety requirements and tests

Definitive Text - EN 61984:2009
Connectors - Safety requirements and tests

Definitive Text - EN 60603-7-1:2009
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60603-7-1:2009
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60603-7-1:2009
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60512-9-4:2011
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

Definitive Text - EN 60603-7-1:2011
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60603-7-1:2011
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60603-7-1:2011
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Definitive Text - EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-1-100:2012
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-1-100:2006
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-1-100:2006
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60512-1-100:2006
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Definitive Text - EN 60352-5:2012
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-5:2012
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60352-5:2012
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Definitive Text - EN 60512-16-21:2012
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

Definitive Text - EN 60512-16-21:2012
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

Definitive Text - EN 60512-16-21:2012
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

Definitive Text - EN 60512-28-100:2013
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

Definitive Text - EN 60512-28-100:2013
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

Definitive Text - EN 60512-28-100:2013
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g

Definitive Text - EN 61076-3-110:2012
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-110:2012
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-110:2012
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 61076-3-110:2008
Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Definitive Text - EN 60512-24-1:2012
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

Definitive Text - EN 60512-24-1:2012
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

Definitive Text - EN 60512-24-1:2012
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

Definitive Text - EN 61076-4-113:2003
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

Definitive Text - EN 61076-4-113:2003
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

Definitive Text - EN 175500:1997
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval

Definitive Text - EN 175500:1997
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval