Publication number | Date of Publication | Review date | Result date | Technical Comittee | Project in progress |
|---|
CECC 75 101-801:1993 (pr=1586)
Two-part connectors for printed boards for basic grid of 2,54 mm with common mounting features | 1993-07-15 | 1998-07-15 | 2001-07-15 | CLC/SR 48B | |
CECC 75 101-803:1994 (pr=1581)
Detail Specification: Two-part connectors for printed boards having a basic grid of 2,54 mm with common square male contacts of 0,63 mm x 0,63 mm | 1994-01-15 | 1999-01-15 | 2002-01-15 | CLC/SR 48B | |
CECC 75 101-804:1994 (pr=1584)
Two-part connectors for printed boards for basic grid of 2,54 mm with free connectors for non-accessible insulation displacement termination (with assessed quality) | 1994-04-15 | 1999-04-15 | 2002-04-15 | CLC/SR 48B | |
CECC 75 101-807:1994 (pr=1585)
Modular two-part connectors for printed boards and backplanes, grid of 2,5 mm - According to IEC 60917 | 1994-07-15 | 1999-07-15 | 2002-07-15 | CLC/SR 48B | |
CECC 75 101-808:1993 (pr=1583)
Two-part connector modules with a basic grid of 2 mm, for printed boards and backplanes | 1993-11-15 | 1998-11-15 | 2001-11-15 | CLC/SR 48B | |
CECC 75 101-810:1994 (pr=5773)
Two-part modular connectors for printed boards and back planes - Basic grid 2 mm with terminations on a multiple grid of 0,5 mm | 1994-04-15 | 1999-04-15 | 2002-04-15 | CLC/SR 48B | |
CECC 75 301-802:1994 (pr=6290)
Detail Specification: Rectangular connectors for frequencies below 3MHz, trapezoidal shaped shells and round contacts, diameter 1 mm with crimp, solder and press-in terminations for printed boards | 1994-10-15 | 1999-10-15 | 2002-10-15 | CLC/SR 48B | |
CECC 75 301:1990 (pr=1664)
Interim example Detail Specification/Blank Detail Specification: Rectangular connectors for frequencies below 3 MHz | 1990-12-15 | 1995-12-15 | 1998-12-15 | CLC/SR 48B | |
EN 175101-802:1999 (pr=13110)
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows | 1999-11-22 | 2004-11-22 | 2007-11-22 | CLC/SR 48B | |
EN 175101-809:2004 (pr=14787)
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality | 2004-03-31 | 2009-03-31 | 2012-03-31 | CLC/SR 48B | |
EN 175201-804:1999 (pr=13115)
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling | 1999-11-23 | 2004-11-23 | 2007-11-23 | CLC/SR 48B | |
EN 175300:1996 (pr=5793)
Sectional Specification: Rectangular connectors for frequencies below 3 MHz | 1996-04-24 | 2001-04-24 | 2004-04-24 | CLC/SR 48B | |
EN 175301-801:2006 (pr=16005)
Detail Specification: High density rectangular connectors, round removable crimp contacts | 2006-11-30 | 2011-11-30 | 2014-11-30 | CLC/SR 48B | |
EN 175301-803:2006 (pr=16006)
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable | 2006-08-29 | 2011-08-29 | 2014-08-29 | CLC/SR 48B | |
EN 175500:1997 (pr=6729)
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval | 1997-05-26 | 2002-05-26 | 2005-05-26 | CLC/SR 48B | |
EN 60068-2-42:2003 (pr=15185)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections | 2003-09-09 | | 2011-09-09 | CLC/SR 48B | |
EN 60068-2-43:2003 (pr=15186)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections | 2003-09-09 | | 2011-09-09 | CLC/SR 48B | |
EN 60130-17:1999 (pr=12047)
Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries | 1999-06-09 | | 2007-06-09 | CLC/SR 48B | |
EN 60130-9:2000 (pr=13529)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | 2000-10-20 | | 2011-04-01 | CLC/SR 48B | EN 60130-9:2011 |
EN 60130-9:2011 (pr=22947)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | 2011-04-01 | | 2019-04-01 | CLC/SR 48B | |
EN 60352-1:1997 (pr=8879)
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance | 1997-10-15 | | 2005-10-15 | CLC/SR 48B | |
EN 60352-2:2006 (pr=16536)
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance | 2006-05-19 | | 2014-05-19 | CLC/SR 48B | |
EN 60352-3:1994 (pr=4652)
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance | 1994-10-11 | | 2002-10-11 | CLC/SR 48B | |
EN 60352-4:1994 (pr=5413)
Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance | 1994-10-20 | | 2002-10-20 | CLC/SR 48B | |
EN 60352-4:1994/A1:2000 (pr=12340)
Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance | 2000-12-07 | | 2008-12-07 | CLC/SR 48B | |
EN 60352-5:2008 (pr=20891)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2008-03-06 | | 2012-05-04 | CLC/SR 48B | EN 60352-5:2012 |
EN 60352-5:2012 (pr=23482)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2012-05-04 | | 2020-05-04 | CLC/SR 48B | |
EN 60352-6:1997 (pr=9091)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance | 1997-10-24 | | 2005-10-24 | CLC/SR 48B | |
EN 60352-7:2002 (pr=13902)
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance | 2002-10-25 | | 2010-10-25 | CLC/SR 48B | |
EN 60352-8:2011 (pr=22636)
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance | 2011-03-25 | | 2019-03-25 | CLC/SR 48B | |
EN 60512-1-100:2006 (pr=16754)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | 2006-05-17 | | 2012-05-04 | CLC/SR 48B | EN 60512-1-100:2012 |
EN 60512-1-100:2012 (pr=23425)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | 2012-05-04 | | 2020-05-04 | CLC/SR 48B | |
EN 60512-1-1:2002 (pr=13945)
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-1-2:2002 (pr=13946)
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-1-3:1997 (pr=8878)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length | 1997-10-24 | | 2005-10-24 | CLC/SR 48B | |
EN 60512-1-4:1997 (pr=9323)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) | 1997-10-24 | | 2005-10-24 | CLC/SR 48B | |
EN 60512-10-4:2003 (pr=15098)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors) | 2003-10-28 | | 2011-10-28 | CLC/SR 48B | |
EN 60512-11-10:2002 (pr=13972)
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-11:2002 (pr=13978)
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-12:2002 (pr=13974)
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-13:2002 (pr=13976)
Connectors for electronic equipment - Tests and measurement - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-14:2003 (pr=15220)
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test | 2003-10-28 | | 2011-10-28 | CLC/SR 48B | |
EN 60512-11-1:1999 (pr=8277)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence | 1999-01-22 | | 2007-01-22 | CLC/SR 48B | |
EN 60512-11-2:2002 (pr=13968)
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-3:2002 (pr=13969)
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state | 2002-04-17 | | 2010-04-17 | CLC/SR 48B | |
EN 60512-11-4:2002 (pr=13970)
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-5:2002 (pr=13973)
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-11-6:2002 (pr=13975)
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist | 2002-04-18 | | 2010-04-18 | CLC/SR 48B | |
EN 60512-11-7:2003 (pr=15192)
Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test | 2003-09-11 | | 2011-09-11 | CLC/SR 48B | |
EN 60512-11-8:1999 (pr=8278)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust | 1999-01-22 | | 2007-01-22 | CLC/SR 48B | |
EN 60512-11-9:2002 (pr=13971)
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-12-1:2006 (pr=16369)
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method | 2006-05-18 | | 2014-05-18 | CLC/SR 48B | |
EN 60512-12-2:2006 (pr=16123)
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method | 2006-03-23 | | 2014-03-23 | CLC/SR 48B | |
EN 60512-12-3:2006 (pr=16098)
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting | 2006-03-23 | | 2014-03-23 | CLC/SR 48B | |
EN 60512-12-4:2006 (pr=16125)
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method | 2006-03-23 | | 2014-03-23 | CLC/SR 48B | |
EN 60512-12-5:2006 (pr=16099)
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method | 2006-03-24 | | 2014-03-24 | CLC/SR 48B | |
EN 60512-12-6:1996 (pr=7048)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering | 1996-03-18 | | 2004-03-18 | CLC/SR 48B | |
EN 60512-12-7:2001 (pr=13414)
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method | 2001-07-05 | | 2009-07-05 | CLC/SR 48B | |
EN 60512-13-1:2006 (pr=16126)
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces | 2006-03-24 | | 2014-03-24 | CLC/SR 48B | |
EN 60512-13-2:2006 (pr=16129)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces | 2006-03-24 | | 2014-03-24 | CLC/SR 48B | |
EN 60512-13-5:2006 (pr=16308)
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method | 2006-03-24 | | 2014-03-24 | CLC/SR 48B | |
EN 60512-14-2:2006 (pr=16131)
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage | 2006-05-24 | | 2014-05-24 | CLC/SR 48B | |
EN 60512-14-4:2006 (pr=16307)
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof | 2006-05-24 | | 2014-05-24 | CLC/SR 48B | |
EN 60512-14-5:2006 (pr=16306)
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure | 2006-05-24 | | 2014-05-24 | CLC/SR 48B | |
EN 60512-14-6:2006 (pr=16305)
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing | 2006-05-24 | | 2014-05-24 | CLC/SR 48B | |
EN 60512-14-7:1998 (pr=11597)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60512-15-1:2008 (pr=20670)
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-2:2008 (pr=20671)
Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-3:2008 (pr=20672)
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-4:2008 (pr=20673)
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-5:2008 (pr=20674)
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-6:2008 (pr=20675)
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-7:2008 (pr=20676)
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment | 2008-07-25 | | 2016-07-25 | CLC/SR 48B | |
EN 60512-15-8:1995 (pr=6916)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application | 1995-12-11 | | 2003-12-11 | CLC/SR 48B | |
EN 60512-16-11:2008 (pr=20916)
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-13:2008 (pr=20917)
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-14:2008 (pr=20918)
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-16:2008 (pr=20901)
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-17:2008 (pr=20902)
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-18:2008 (pr=20903)
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-1:2008 (pr=20907)
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-20:1996 (pr=7625)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) | 1996-10-24 | | 2004-10-24 | CLC/SR 48B | |
EN 60512-16-21:2012 (pr=23111)
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses | 2012-06-29 | | 2020-06-29 | CLC/SR 48B | |
EN 60512-16-2:2008 (pr=20908)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-3:2008 (pr=20677)
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-4:2008 (pr=20909)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-5:2008 (pr=20910)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-6:2008 (pr=20911)
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-7:2008 (pr=20913)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping | 2008-09-19 | | 2016-09-19 | CLC/SR 48B | |
EN 60512-16-8:2008 (pr=20914)
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-16-9:2008 (pr=20915)
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force | 2008-07-17 | | 2016-07-17 | CLC/SR 48B | |
EN 60512-17-1:2010 (pr=22391)
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness | 2010-09-10 | | 2018-09-10 | CLC/SR 48B | |
EN 60512-17-2:2011 (pr=22782)
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation | 2011-06-10 | | 2019-06-10 | CLC/SR 48B | |
EN 60512-17-3:2010 (pr=22392)
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) | 2010-09-10 | | 2018-09-10 | CLC/SR 48B | |
EN 60512-17-4:2010 (pr=22393)
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion | 2010-09-10 | | 2018-09-10 | CLC/SR 48B | |
EN 60512-19-1:2010 (pr=22394)
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels | 2010-06-04 | | 2018-06-04 | CLC/SR 48B | |
EN 60512-19-3:1997 (pr=8880)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance | 1997-10-24 | | 2005-10-24 | CLC/SR 48B | |
EN 60512-1:2001 (pr=13411)
Connectors for electronic equipment - Tests and measurements - Part 1: General | 2001-04-05 | | 2009-04-05 | CLC/SR 48B | |
EN 60512-2-1:2002 (pr=13947)
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-2-2:2003 (pr=14679)
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method | 2003-07-18 | | 2011-07-18 | CLC/SR 48B | |
EN 60512-2-3:2002 (pr=13948)
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-2-5:2003 (pr=14681)
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance | 2003-07-18 | | 2011-07-18 | CLC/SR 48B | |
EN 60512-2-6:2002 (pr=13949)
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-20-1:2010 (pr=22396)
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame | 2010-07-09 | | 2018-07-09 | CLC/SR 48B | |
EN 60512-20-2:2000 (pr=13579)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness | 2000-08-24 | | 2008-08-24 | CLC/SR 48B | |
EN 60512-20-3:2010 (pr=22395)
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire | 2010-07-09 | | 2018-07-09 | CLC/SR 48B | |
EN 60512-21-1:2010 (pr=22397)
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance | 2010-07-09 | | 2018-07-09 | CLC/SR 48B | |
EN 60512-22-1:2010 (pr=22398)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance | 2010-07-09 | | 2018-07-09 | CLC/SR 48B | |
EN 60512-23-2:2010 (pr=22399)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters | 2010-09-17 | | 2018-09-17 | CLC/SR 48B | |
EN 60512-23-3:2001 (pr=12015)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories | 2001-02-21 | | 2009-02-21 | CLC/SR 48B | |
EN 60512-23-4:2001 (pr=13415)
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain | 2001-08-09 | | 2009-08-09 | CLC/SR 48B | |
EN 60512-23-7:2005 (pr=15286)
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors | 2005-03-22 | | 2013-03-22 | CLC/SR 48B | |
EN 60512-24-1:2012 (pr=22400)
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism | 2012-11-16 | | 2020-11-16 | CLC/SR 48B | |
EN 60512-25-1:2001 (pr=13635)
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio | 2001-10-29 | | 2009-10-29 | CLC/SR 48B | |
EN 60512-25-2:2002 (pr=13953)
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b: Attenuation (insertion loss) | 2002-06-04 | | 2010-06-04 | CLC/SR 48B | |
EN 60512-25-3:2001 (pr=13633)
Connectors for electronic equipment - Tests and measurement - Part 25-3: Test 25c - Rise time degradation | 2001-10-29 | | 2009-10-29 | CLC/SR 48B | |
EN 60512-25-4:2001 (pr=13636)
Connectors for electronic equipment - Tests and measurements - Part 25-4: Teste25d - Propagation delay | 2001-10-29 | | 2009-10-29 | CLC/SR 48B | |
EN 60512-25-5:2004 (pr=14397)
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss | 2004-09-21 | | 2012-09-21 | CLC/SR 48B | |
EN 60512-25-6:2004 (pr=15685)
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter | 2004-07-29 | | 2012-07-29 | CLC/SR 48B | |
EN 60512-25-7:2005 (pr=15733)
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) | 2005-03-22 | | 2013-03-22 | CLC/SR 48B | |
EN 60512-25-9:2008 (pr=21144)
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk | 2008-11-28 | | 2016-11-28 | CLC/SR 48B | |
EN 60512-26-100:2008 (pr=21205)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g | 2008-10-24 | | 2016-10-24 | CLC/SR 48B | |
EN 60512-26-100:2008/A1:2011 (pr=22648)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g | 2011-04-22 | | 2019-04-22 | CLC/SR 48B | |
EN 60512-27-100:2012 (pr=22962)
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g | 2012-02-17 | | 2020-02-17 | CLC/SR 48B | |
EN 60512-28-100:2013 (pr=23836)
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g | 2013-04-05 | | 2021-04-05 | CLC/SR 48B | |
EN 60512-3-1:2002 (pr=13925)
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance | 2002-04-12 | | 2010-04-12 | CLC/SR 48B | |
EN 60512-4-1:2003 (pr=14678)
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof | 2003-07-18 | | 2011-07-18 | CLC/SR 48B | |
EN 60512-4-2:2002 (pr=13926)
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-4-3:2002 (pr=13927)
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-5-1:2002 (pr=13928)
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-5-2:2002 (pr=13929)
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-6-1:2002 (pr=13930)
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-6-2:2002 (pr=13932)
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump | 2002-04-17 | | 2010-04-17 | CLC/SR 48B | |
EN 60512-6-3:2002 (pr=13934)
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-6-4:2002 (pr=13931)
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) | 2002-04-19 | | 2010-04-19 | CLC/SR 48B | |
EN 60512-6-5:1999 (pr=9694)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration | 1999-11-24 | | 2007-11-24 | CLC/SR 48B | |
EN 60512-7-1:2010 (pr=22387)
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) | 2010-05-21 | | 2018-05-21 | CLC/SR 48B | |
EN 60512-7-2:2012 (pr=22777)
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact | 2012-02-03 | | 2020-02-03 | CLC/SR 48B | |
EN 60512-8-1:2010 (pr=22388)
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse | 2010-09-17 | | 2018-09-17 | CLC/SR 48B | |
EN 60512-8-2:2011 (pr=22778)
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial | 2011-06-10 | | 2019-06-10 | CLC/SR 48B | |
EN 60512-8-3:2011 (pr=22779)
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever | 2011-06-10 | | 2019-06-10 | CLC/SR 48B | |
EN 60512-9-1:2010 (pr=22389)
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation | 2010-04-16 | | 2018-04-16 | CLC/SR 48B | |
EN 60512-9-2:2012 (pr=22780)
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature | 2012-02-17 | | 2020-02-17 | CLC/SR 48B | |
EN 60512-9-3:2006 (pr=16553)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load | 2006-03-23 | | 2011-07-29 | CLC/SR 48B | EN 60512-9-3:2011 |
EN 60512-9-3:2011 (pr=22757)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load | 2011-07-29 | | 2019-07-29 | CLC/SR 48B | |
EN 60512-9-4:2011 (pr=22781)
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) | 2011-06-10 | | 2019-06-10 | CLC/SR 48B | |
EN 60512-9-5:2010 (pr=22390)
Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic | 2010-05-21 | | 2018-05-21 | CLC/SR 48B | |
EN 60512-99-001:2012 (pr=23610)
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power | 2012-10-19 | | 2020-10-19 | CLC/SR 48B | |
EN 60603-10:1998 (pr=7827)
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-12:1998 (pr=7829)
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-13:1998 (pr=6392)
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-14:1999 (pr=12048)
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment | 1999-06-10 | | 2007-06-10 | CLC/SR 48B | |
EN 60603-1:1998 (pr=7820)
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality | 1998-02-25 | | 2006-02-25 | CLC/SR 48B | |
EN 60603-2:1998 (pr=7246)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features | 1998-08-17 | | 2006-08-17 | CLC/SR 48B | |
EN 60603-2:1998/A1:2005 (pr=14196)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features | 2005-05-11 | | 2013-05-11 | CLC/SR 48B | |
EN 60603-3:1998 (pr=7821)
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,1 in) centres and staggered terminations at that same spacing | 1998-02-25 | | 2006-02-25 | CLC/SR 48B | |
EN 60603-4:1998 (pr=7822)
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-5:1998 (pr=7823)
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-6:1998 (pr=7824)
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness | 1998-02-26 | | 2006-02-26 | CLC/SR 48B | |
EN 60603-7-1:2009 (pr=21548)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors | 2009-11-19 | | 2011-06-10 | CLC/SR 48B | EN 60603-7-1:2011 |
EN 60603-7-1:2011 (pr=22877)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors | 2011-06-10 | | 2019-06-10 | CLC/SR 48B | |
EN 60603-7-2:2009 (pr=16181)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | 2009-11-19 | | 2010-07-09 | CLC/SR 48B | EN 60603-7-2:2010 |
EN 60603-7-2:2010 (pr=22325)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | 2010-07-09 | | 2018-07-09 | CLC/SR 48B | |
EN 60603-7-3:2009 (pr=20820)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | 2009-11-19 | | 2010-07-16 | CLC/SR 48B | EN 60603-7-3:2010 |
EN 60603-7-3:2010 (pr=22326)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz | 2010-07-16 | | 2018-07-16 | CLC/SR 48B | |
EN 60603-7-41:2010 (pr=22151)
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz | 2010-05-07 | | 2018-05-07 | CLC/SR 48B | |
EN 60603-7-4:2005 (pr=15221)
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz | 2005-03-31 | | 2010-07-23 | CLC/SR 48B | EN 60603-7-4:2010 |
EN 60603-7-4:2010 (pr=22327)
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz | 2010-07-23 | | 2018-07-23 | CLC/SR 48B | |
EN 60603-7-51:2010 (pr=22152)
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz | 2010-05-07 | | 2018-05-07 | CLC/SR 48B | |
EN 60603-7-5:2009 (pr=16165)
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz | 2009-11-19 | | 2010-07-23 | CLC/SR 48B | EN 60603-7-5:2010 |
EN 60603-7-5:2010 (pr=22328)
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz | 2010-07-23 | | 2018-07-23 | CLC/SR 48B | |
EN 60603-7-71:2010 (pr=22192)
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz | 2010-10-15 | | 2018-10-15 | CLC/SR 48B | |
EN 60603-7-7:2006 (pr=16133)
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz | 2006-07-26 | | 2010-09-17 | CLC/SR 48B | EN 60603-7-7:2010 |
EN 60603-7-7:2010 (pr=22329)
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz | 2010-09-17 | | 2018-09-17 | CLC/SR 48B | |
EN 60603-7:2009 (pr=21087)
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | 2009-11-19 | | 2017-11-19 | CLC/SR 48B | |
EN 60603-7:2009/A1:2011 (pr=22848)
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | 2011-11-11 | | 2019-11-11 | CLC/SR 48B | |
EN 60603-8:1998 (pr=7825)
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm | 1998-02-25 | | 2006-02-25 | CLC/SR 48B | |
EN 60603-9:1998 (pr=7826)
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) | 1998-02-25 | | 2006-02-25 | CLC/SR 48B | |
EN 61076-1:2006 (pr=16327)
Connectors for electronic equipment - Product requirements - Part 1: Generic specification | 2006-06-09 | | 2014-06-09 | CLC/SR 48B | |
EN 61076-2-001:2001 (pr=13653)
Connectors for electronic equipment - Part 2-001: Circular connectors - Blank detail specification | 2001-12-11 | | 2011-08-19 | CLC/SR 48B | EN 61076-2-001:2011 |
EN 61076-2-001:2011 (pr=22646)
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification | 2011-08-19 | | 2019-08-19 | CLC/SR 48B | |
EN 61076-2-101:2008 (pr=21145)
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | 2008-09-05 | | 2012-08-03 | CLC/SR 48B | EN 61076-2-101:2012 |
EN 61076-2-101:2012 (pr=23438)
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | 2012-08-03 | | 2020-08-03 | CLC/SR 48B | |
EN 61076-2-102:2002 (pr=13901)
Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply | 2002-07-26 | | 2010-07-26 | CLC/SR 48B | |
EN 61076-2-103:2004 (pr=15238)
Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') | 2004-05-14 | | 2012-05-14 | CLC/SR 48B | |
EN 61076-2-104:2008 (pr=21146)
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking | 2008-09-05 | | 2016-05-22 | CLC/SR 48B | FprEN 61076-2-104:2013 |
EN 61076-2-105:2008 (pr=21278)
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking | 2008-09-05 | | 2016-09-05 | CLC/SR 48B | |
EN 61076-2-106:2011 (pr=22645)
Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 | 2011-08-22 | | 2019-08-22 | CLC/SR 48B | |
EN 61076-2-107:2010 (pr=22311)
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking | 2010-06-11 | | 2018-06-11 | CLC/SR 48B | |
EN 61076-2:1999 (pr=12378)
Connectors for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification | 1999-04-09 | | 2011-07-29 | CLC/SR 48B | EN 61076-2:2011 |
EN 61076-2:2011 (pr=22647)
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors | 2011-07-29 | | 2019-07-29 | CLC/SR 48B | |
EN 61076-3-001:2008 (pr=20819)
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification | 2008-11-05 | | 2016-11-05 | CLC/SR 48B | |
EN 61076-3-100:2000 (pr=13256)
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row | 2000-01-14 | | 2008-01-14 | CLC/SR 48B | |
EN 61076-3-101:1997 (pr=8621)
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line | 1997-10-31 | | 2005-10-31 | CLC/SR 48B | |
EN 61076-3-103:2004 (pr=15288)
Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) | 2004-02-11 | | 2012-02-11 | CLC/SR 48B | |
EN 61076-3-104:2006 (pr=16752)
Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz | 2006-11-03 | | 2014-11-03 | CLC/SR 48B | |
EN 61076-3-106:2006 (pr=16667)
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface | 2006-12-15 | | 2014-12-15 | CLC/SR 48B | |
EN 61076-3-110:2008 (pr=20767)
Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz | 2008-04-11 | | 2012-07-27 | CLC/SR 48B | EN 61076-3-110:2012 |
EN 61076-3-110:2012 (pr=23390)
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz | 2012-07-27 | | 2020-07-27 | CLC/SR 48B | |
EN 61076-3-112:2006 (pr=16554)
Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment | 2006-06-09 | | 2014-06-09 | CLC/SR 48B | |
EN 61076-3-114:2009 (pr=21086)
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type | 2009-08-07 | | 2017-08-07 | CLC/SR 48B | |
EN 61076-3-115:2010 (pr=21142)
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type | 2010-09-17 | | 2018-09-17 | CLC/SR 48B | |
EN 61076-3-116:2008 (pr=21143)
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever | 2008-11-21 | | 2016-11-21 | CLC/SR 48B | |
EN 61076-3-117:2009 (pr=21857)
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling | 2009-08-07 | | 2017-08-07 | CLC/SR 48B | |
EN 61076-3-118:2010 (pr=22419)
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling | 2010-07-23 | | 2018-07-23 | CLC/SR 48B | |
EN 61076-3:2008 (pr=20818)
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification | 2008-11-05 | | 2016-11-05 | CLC/SR 48B | |
EN 61076-4-001:1996 (pr=7644)
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification | 1996-11-06 | | 2004-11-06 | CLC/SR 48B | |
EN 61076-4-100:2001 (pr=13634)
Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes | 2001-12-12 | | 2009-12-12 | CLC/SR 48B | |
EN 61076-4-101:2001 (pr=13484)
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 | 2001-10-31 | | 2009-10-31 | CLC/SR 48B | |
EN 61076-4-102:1997 (pr=8205)
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 | 1997-06-11 | | 2005-06-11 | CLC/SR 48B | |
EN 61076-4-103:1999 (pr=12386)
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm | 1999-04-09 | | 2007-04-09 | CLC/SR 48B | |
EN 61076-4-104:1999 (pr=12429)
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm | 1999-04-09 | | 2007-04-09 | CLC/SR 48B | |
EN 61076-4-105:1998 (pr=7841)
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry | 1998-08-17 | | 2006-08-17 | CLC/SR 48B | |
EN 61076-4-107:2001 (pr=14489)
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations | 2001-10-31 | | 2009-10-31 | CLC/SR 48B | |
EN 61076-4-108:2002 (pr=13492)
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 | 2002-06-13 | | 2010-06-13 | CLC/SR 48B | |
EN 61076-4-110:2002 (pr=13547)
Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function | 2002-02-07 | | 2010-02-07 | CLC/SR 48B | |
EN 61076-4-111:2002 (pr=13788)
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 | 2002-06-13 | | 2010-06-13 | CLC/SR 48B | |
EN 61076-4-113:2003 (pr=13809)
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications | 2003-02-20 | | 2011-02-20 | CLC/SR 48B | |
EN 61076-4-114:2003 (pr=14665)
Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm | 2003-05-28 | | 2011-05-28 | CLC/SR 48B | |
EN 61076-4-115:2003 (pr=14484)
Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment | 2003-08-28 | | 2011-08-28 | CLC/SR 48B | |
EN 61076-4-116:2012 (pr=23391)
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function | 2012-06-22 | | 2020-06-22 | CLC/SR 48B | |
EN 61076-4:1996 (pr=6667)
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors | 1996-01-05 | | 2004-01-05 | CLC/SR 48B | |
EN 61076-7-001:2004 (pr=15686)
Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification | 2004-09-23 | | 2012-09-23 | CLC/SR 48B | |
EN 61076-7-100:2006 (pr=16748)
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system | 2006-07-20 | | 2014-07-20 | CLC/SR 48B | |
EN 61076-7:2000 (pr=13704)
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification | 2000-11-23 | | 2008-11-23 | CLC/SR 48B | |
EN 61984:2009 (pr=21158)
Connectors - Safety requirements and tests | 2009-06-26 | | 2017-06-26 | CLC/SR 48B | |
EN 62197-1:2006 (pr=16329)
Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification | 2006-06-09 | | 2014-06-09 | CLC/SR 48B | |