International Standards and Conformity Assessment for all electrical, electronic and related technologies

 

Project

Reference EN 60695-2-10:2013
Title Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Project Number 23727
Abstract/Scope IEC 60695-2-10:2013 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this standard is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials. A detailed description of each particular test procedure is given in the respective standards IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. This second edition of IEC 60695-2-10 cancels and replaces the first edition of IEC 60695-2-10 published in 2000. This edition constitutes a technical revision. The main changes with respect to the previous edition are as follows: - A table of contents has been added. - The introduction has been updated to align with other TC89 documents. - The scope has been clarified to align with other documents in the IEC 60695-2 Glow-wire series. - Terms and definitions relevant to this document have been added. - Clause 4 has been deleted and the remaining clauses renumbered. - The description of the power supply has been updated with additional details (see 4.1). - The temperature measuring system (see 4.3) and the description of the specified layer has been updated (see 4.4). - New guidance has been introduced to assist in the verification of the temperature measuring system (see 5.2 and Annex C). - The common test produced has been clarified (see Clause 7). - The tolerances have been changed for the dimensions of the glow-wire (see Figure 1). - New guidance on flaming observations has been added (see Annex B). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-2-11, IEC 60695-2-12, and IEC 60695-2-13. Keywords: Glowing/hot-wire, Glow-wire.
Status
Published

Status

Current Stage code 6060
Current Stage code date 2013-06-28
Current Stage code deadline 2014-02-14
Deadline date for vote  

Legal

Directive(s) LVD (2006/95/EC)
Mandate(s)  
Order Voucher  

Details

IEC Technical Body IEC/TC 89
Reference Document IEC 60695-2-10:2013 (EQV)
ICS 13.220.40 - Ignitability and burning behaviour of materials and products
29.020 - Electrical engineering in general
Keywords Fire; Hazard; Wire; Glow-wire; Test
Note 2013-05-02 - Publication editing allocated to cpalagi@cencenelec.eu Supersedes EN 60695-2-10:2001 * 89/1105/RVC established on 2012-02-03: FDIS decided
A-Deviation(s)  
Special National Condition(s)  

Environment

Clause
Categories - Aspects
Product Life Cycle
Information

History

Stage
Date
Deadline Date
Documents
6060 2013-06-28 2014-02-14 export to doc file  EN  FR  DE
5099 2013-05-14 2013-06-11  
5060 2013-03-18 2013-04-08 export to doc file  EN
5020 2013-01-11 2013-03-15  
3090 2012-02-03 2012-05-31  
5060 2012-01-31 2012-02-21 export to doc file  EN
5020 2011-08-26 2012-01-27  
1090 2011-08-23 2011-08-26  

Implementation Dates

date of Ratification (DOR) (1) 2013-05-14
date of Availability (DAV) (2) 2013-06-28
date of Announcement (DOA) (3) 2013-08-14
date of Publication (DOP) (4) 2014-02-14
date of Withdrawal (DOW) (5) 2016-05-14

Relations

Supersedes EN 60695-2-10:2001
Superseded by  
Normative reference (6) ISO/IEC Guide 51:1999
IEC Guide 104:2010
ISO 4046-4:2002
ISO 13943:2008
EN 60584-1
EN 60584-2
EN 60695-2-11
EN 60695-2-12
EN 60695-2-13

(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved


(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat


(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level


(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement


(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn


(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.