International Standards and Conformity Assessment for all electrical, electronic and related technologies



Reference EN 50083-8:2013
Title Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks
Project Number 23014
Abstract/Scope 1.1 General Standards of the EN 50083 and EN 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing and transmitting all kinds of data signals for interactive services using all applicable transmission media. These signals are typically transmitted in networks by frequency-multiplexing techniques. This includes for instance  regional and local broadband cable networks,  extended satellite and terrestrial television distribution systems,  individual satellite and terrestrial television receiving systems, and all kinds of equipment, systems and installations used in such cable networks, distribution and receiving systems. The extent of this standardization work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input of the customer premises equipment. The standardization work will consider coexistence with users of the RF spectrum in wired and wireless transmission systems. The standardization of any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. 1.2 Specific scope of EN 50083 8 This European Standard applies to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz. It should be noted that measurements below 30 MHz are not generally considered useful in the context of cable networks and are difficult to perform in practice. Application of the harmonized standard EN 50529-2 provides presumption of conformance to the EMC Directive. Therefore, to fulfil the requirements of EN 50529-2, it is necessary to use cable network equipment that satisfies the requirements of EN 50083-2 regarding limits of radiation and of immunity to external fields. This European Standard specifies methods of measurement and EMC performance requirements under operating conditions (in situ) to ensure the ongoing EMC integrity of cable networks. Cable networks beyond the system outlets (e.g. the receiver lead, in simplest terms) which begin at the system outlet and end at the input to the subscriber's terminal equipment are not covered by the standard EN 50083 8. Requirements for the electromagnetic compatibility of receiver leads are laid down in EN 60966 2 4, EN 60966 2 5 and EN 60966 2 6. Cable networks and a wide range of radio services have to coexist. These include for example the emergency services, safety of life, broadcasting, aeronautical, radio navigation services and also land mobile, amateur and cellular radio services. Frequency ranges of typical safety of life services are listed in Annex B. Additional protection for certain services may be required by national regulations.


Current Stage code 6060
Current Stage code date 2013-12-20
Current Stage code deadline 2014-11-08
Deadline date for vote 2013-06-30


Order Voucher  


IEC Technical Body IEC/TC 100
Reference Document  
ICS 33.060.40 - Cabled distribution systems
33.100.01 - Electromagnetic compatibility in general
Keywords Cable; Network; Television; Sound; Electromagnetic Compatibility
Note 2013-10-07 - Publication editing allocated to * Supersedes EN 50083-8:2002 + A11:2008
Special National Condition(s)  


Categories - Aspects
Product Life Cycle


Deadline Date
6060 2013-12-20 2014-11-08 export to doc file  EN  FR  DE
5099 2013-11-11 2013-12-09  
5060 2013-10-07 2013-10-28 export to doc file  EN
5020 2013-05-03 2013-10-04 export to doc file  EN  FR
4099 2013-04-17    
3020 2011-12-16 2012-03-30  
2020 2011-12-01    
1099 2010-08-31    
1000 2010-05-27 2010-08-31  

Implementation Dates

date of Ratification (DOR) (1) 2013-11-11
date of Availability (DAV) (2) 2013-12-20
date of Announcement (DOA) (3) 2014-05-08
date of Publication (DOP) (4) 2014-11-08
date of Withdrawal (DOW) (5) 2016-11-08


Supersedes EN 50083-8:2002
EN 50083-8:2002/A11:2008
Superseded by  
Normative reference (6)  

(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved

(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat

(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level

(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement

(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn

(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.